{"title":"Sale products","description":"","products":[{"product_id":"wolverine-airsoft-inferno-premium-v2-gen-2-m4-suuttimella","title":"Wolverine Airsoft Inferno Premium V2 (GEN 2), M4 with nozzle","description":"\u003cp\u003eThe Inferno GEN 2 takes HPA airsoft technology to a whole new level. A few years ago, Wolverine Airsoft released the SMP pneumatic system, which proved to be a great success. Following the success of the SMP, similar products from competing manufacturers appeared on the market, as the technology used in the SMP turned out to be highly effective. The release of the Inferno Gen2 once again changes the competitive landscape, just like the SMP did.\u003c\/p\u003e\n\u003cp\u003eThe GEN 2 Inferno combines a single-solenoid system with an independently moving “poppet valve” and nozzle. The single-solenoid design ensures the easy adjustability that Wolverine products are known for. GEN 2 specifically addresses the “open bolt” issue (open bolt problem: the gun only works with stiff hop-up rubbers). The GEN2 operating principle can be described as a hybrid between open-bolt and closed-bolt systems, as GEN2 functions as open bolt from the user’s perspective, but the BB is chambered into the hop-up unit like in a closed bolt. This hybrid design allows for easy tuning, reliable feeding even on the first shot, and improved air efficiency. GEN2 uses approximately 10–15% less air compared to previous models.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePatented independent poppet valve and nozzle\u003c\/li\u003e\n\u003cli\u003eHybrid design allows a short pause in airflow between loading and firing the BB\u003c\/li\u003e\n\u003cli\u003eImproves hop-up performance\u003c\/li\u003e\n\u003cli\u003eCompatible with previously released Wolverine Airsoft electronics\u003c\/li\u003e\n\u003cli\u003eEstimated 10–15% increase in air efficiency\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHPA Drop-in Cylinder Replacement\u003c\/li\u003e\n\u003cli\u003eAdjustable velocity, rate of fire, and burst mode\u003c\/li\u003e\n\u003cli\u003eInstant trigger response\u003c\/li\u003e\n\u003cli\u003eFCU “full time sleep mode” – FCU consumes minimal power when the gun is idle\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eOperating pressure: 40–120 psi\u003c\/li\u003e\n\u003cli\u003eMuzzle energy: 0.5 J–3 J (depends on setup; longer barrels produce higher energy)\u003c\/li\u003e\n\u003cli\u003eRate of Fire (ROF): Adjustable: 5–40 RPS\u003c\/li\u003e\n\u003cli\u003eFire modes: Semi-auto, burst (1, 2, 3, 5, or 7 BBs), or full-auto\u003c\/li\u003e\n\u003cli\u003eTrigger delay: ~10 ms (time from trigger pull to BB exiting the barrel)\u003c\/li\u003e\n\u003cli\u003eFCU dimensions: 1.55 cm x 5.10 cm\u003c\/li\u003e\n\u003cli\u003eBattery: 7.4 V with JST connector\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNote!\u003c\/strong\u003e\u003cbr\u003e\n\u003cstrong\u003eTo use the Wolverine HPA kit, you will also need a suitable battery for the FCU, a high-pressure air tank, and a regulator!\u003c\/strong\u003e\u003c\/p\u003e","brand":"Wolverine Airsoft","offers":[{"title":"Default Title","offer_id":54236515762524,"sku":"NFR-CA-012-M4-SKU","price":449.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0612\/6636\/2610\/files\/inferno-scaled-1.jpg?v=1743362578"},{"product_id":"dboys-m14-440bb-hi-cap-lipas-metallinen","title":"DBoys M14 440bb Hi-Cap magazine (metal)","description":"\u003cp\u003eDBoys M14 440rd Hi-Cap Magazine (Metal)\u003cbr\u003e\nMetal 440-round hi-cap magazine for the M14 series, manufactured by DBoys.\u003c\/p\u003e","brand":"DBoys","offers":[{"title":"Default Title","offer_id":54236518121820,"sku":"DBOYSM14440","price":1.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0612\/6636\/2610\/files\/dboys-m14-440bb-hi-cap-lipas-metallinen.jpg?v=1743362766"},{"product_id":"blue-desert-smartube","title":"Blue Desert Desert SmarTube","description":"\u003cp\u003eThe Blue Desert SmarTube converts any standard water bottle into a “hydration system.” The SmarTube screws onto the bottle in place of the cap, allowing the bottle to be placed in a backpack while the tube is conveniently routed over the shoulder for easy access when you get thirsty.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCompatible with all standard soft drink bottles\u003c\/li\u003e\n\u003cli\u003eDrink from your water bottle hands-free\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Blue Desert","offers":[{"title":"Default Title","offer_id":54236730065244,"sku":"7290010428007","price":0.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0612\/6636\/2610\/files\/20190605-DSC_1380-619x1024-1.jpg?v=1743366693"},{"product_id":"ics-mp-47-mx5-early-stage-cut-off-lever","title":"ICS MP-47 MX5 Early Stage Cut Off Lever","description":"\u003cp\u003e ICS MP-47 MX5 Early Stage Cut Off Lever\u003c\/p\u003e","brand":"ICS","offers":[{"title":"Default Title","offer_id":54236909011292,"sku":"MP-47","price":2.22,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0612\/6636\/2610\/files\/ICS-Airsoft-parts-MX5-Cut-Off-Lever-Early-Ver-MP-47.jpg?v=1743369956"},{"product_id":"krytac-trident-mkii-crb-m-musta","title":"Krytac Trident MKII CRB-M, black","description":"\u003cp\u003eKRYTAC Trident MKII CRB-M represents the compact model of the Trident series, making it an excellent choice for both CQB-style built environments and outdoor fields with medium engagement distances.\u003cbr\u003eThe front handguard is a high-quality 10-inch free-float TR210 rail system made of aluminum. The TR210 follows the commonly used M-LOK standard on the bottom and sides. The RIS-standard top rail continues almost all the way to the muzzle, allowing a wide variety of optics and accessories to be mounted along the entire length of the rifle.\u003c\/p\u003e\n\u003cp\u003eThe upper and lower receivers are made from reinforced aluminum and are compatible with all M4 AEG-type accessories and aftermarket parts. The KRYTAC receiver differs from traditional M4 AEG receivers through its durability-enhancing reinforcements and small usability improvements. The trigger guard has been enlarged, and the magazine well is wider than usual, enabling faster reloads. When shouldering the rifle, it quickly becomes clear that KRYTAC’s design solutions and subtle modifications to the classic M4 platform significantly improve ergonomics and give the rifle an exceptionally solid feel.\u003c\/p\u003e\n\u003cp\u003eThe CRB model features an ambidextrous fire selector, allowing the rifle to be operated smoothly with either hand. This benefits not only left-handed players—ambidexterity is crucial in tight, built-up environments.\u003c\/p\u003e\n\u003cp\u003eThe Trident MK2 CRB gearbox is built around KRYTAC’s extremely strong Nautilus gearbox shell. Its thick material walls ensure durability even in extreme conditions. The gearbox uses 8 mm bearing seats. Inside you’ll find reinforced 8 mm ball bearings, a durable polymer piston with four metal teeth, a shock-absorbing cylinder head, a high-torque motor, and a quick-change spring system accessed from the back of the gearbox. The gearbox also includes a KRYTAC MOSFET that protects the trigger contacts from burning and reduces overall power consumption.\u003c\/p\u003e\n\u003ch2\u003eWhy are KRYTAC guns so exceptional?\u003c\/h2\u003e\n\u003cp\u003eIn their own brand description, KRYTAC emphasizes that their products are designed to deliver an outstanding user experience above all else. A great user experience includes many factors, but the most important is simple: the gun must function flawlessly from the start of the game day to the end—rain or shine. If that promise is broken, the average player won’t appreciate any advanced electronic features if the gun fails to perform its basic duty: to let them play.\u003c\/p\u003e\n\u003cp\u003eIn our experience, KRYTAC fulfills this promise extremely well. What makes KRYTAC airsoft guns special is not a long list of electronic gimmicks, but uncompromising quality and reliability. KRYTAC’s internal mechanics rely on proven engineering solutions, excellent material choices, and meticulous assembly. The rigidity and robustness of the receivers reflect the brand’s roots in KRISS USA’s firearms division. The firearm heritage is clearly visible in the receiver design and manufacturing. The combination of a firearm-inspired receiver and KRYTAC’s internal engineering creates a highly dependable option for players who want a rifle that simply works—and keeps on working.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNOTE!\u003c\/strong\u003e Battery and charger are sold separately!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCompatible batteries\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eKRYTAC AEGs are built to withstand high-performance batteries. You can use 7.4V or 11.1V LiPo, Lithium-Ion, and 9.6V NiCd\/NiMH batteries. However, using batteries with higher nominal voltage voids the warranty.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eExternal Features\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eLicensed DEFIANCE® TR210 M-LOK handguard\u003c\/li\u003e\n\u003cli\u003eLicensed DEFIANCE® pistol grip\u003c\/li\u003e\n\u003cli\u003eLicensed CMC flat trigger\u003c\/li\u003e\n\u003cli\u003eKRYTAC stock\u003c\/li\u003e\n\u003cli\u003eAmbidextrous fire selectors\u003c\/li\u003e\n\u003cli\u003eMock bolt catch locks to the rear for easier hop-up adjustment\u003c\/li\u003e\n\u003cli\u003eInternal Features\u003c\/li\u003e\n\u003cli\u003e8 mm Nautilus bearings\u003c\/li\u003e\n\u003cli\u003eIntegrated MOSFET\u003c\/li\u003e\n\u003cli\u003eQuick-change spring system from the rear of the gearbox\u003c\/li\u003e\n\u003cli\u003eCorrected angle of engagement using a “sorbo” pad on the cylinder head\u003c\/li\u003e\n\u003cli\u003eCorrosion-resistant Nautilus gearbox shell\u003c\/li\u003e\n\u003cli\u003eRotary hop-up unit with over 50 locking adjustment positions\u003c\/li\u003e\n\u003cli\u003e30,000 RPM KRYTAC high-torque motor\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eName: Mk2 CRB-M\u003c\/li\u003e\n\u003cli\u003eManufacturer: Krytac\u003c\/li\u003e\n\u003cli\u003eMuzzle energy: approx. 1.5 J\u003c\/li\u003e\n\u003cli\u003eVelocity (0.20 g): approx. 121 m\/s with 0.20 g BBs\u003c\/li\u003e\n\u003cli\u003eRate of fire (11.1V): approx. 21 RPS\u003c\/li\u003e\n\u003cli\u003eReceiver material: Metal\u003c\/li\u003e\n\u003cli\u003eGearbox: V2, Nautilus\u003c\/li\u003e\n\u003cli\u003eHop-up: Adjustable\u003c\/li\u003e\n\u003cli\u003eConnector: T-plug\/Deans (mini tamiya adapter included)\u003c\/li\u003e\n\u003cli\u003eLength: 675–787 mm\u003c\/li\u003e\n\u003cli\u003eInner barrel: 280 mm, 6.05 mm\u003c\/li\u003e\n\u003cli\u003eWeight: 2800 g\u003c\/li\u003e\n\u003cli\u003ePower source: Electric\u003c\/li\u003e\n\u003cli\u003eMotor: Long type\u003c\/li\u003e\n\u003cli\u003eFire modes: Semi-auto, full-auto\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Krytac","offers":[{"title":"Default Title","offer_id":54236928967004,"sku":"811607031386","price":499.91,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0612\/6636\/2610\/files\/26752.png?v=1743370354"},{"product_id":"jefftron-mosfet-v3-johdotus-rataslaatikon-paalle","title":"Jefftron Mosfet - V3, wiring on top of the gearbox","description":"\u003cp\u003eJefftron Mosfet – V3 combines an extremely compact mosfet directly with Version 3 mechanical switch contacts, allowing the mosfet to be installed entirely inside the gearbox with ease. The circuit prevents arcing that occurs in traditional mechanical trigger systems, which eventually leads to carbonized contact surfaces. It reduces the electrical resistance compared to a mechanical switch, allowing the motor to draw more power from the battery. Lower resistance makes the electrical system more efficient, resulting in higher rate of fire and reduced trigger response time.\u003c\/p\u003e\n\u003cp\u003eThe package includes suitable connectors for the motor and fuse, as well as heat shrink tubing. In addition, a highly conductive T-connector (Deans) is included for battery connection. The connectors are separate and require soldering to the wires during installation. In the wired version, the wires connected to the circuit itself are pre-soldered to simplify assembly.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications:\u003cbr\u003e\n\u003c\/strong\u003e– Mosfet integrated with SHS-manufactured V3 switch contacts\u003cbr\u003e\n– Easy to install in all Marui V3-compatible gearboxes\u003cbr\u003e\n– Pre-soldered wires on the circuit for easier assembly. \u003cstrong\u003eNOTE!\u003c\/strong\u003e Battery, motor, and fuse connectors are not pre-installed!\u003cbr\u003e\n– Circuit coated with a transparent varnish for moisture protection.\u003cbr\u003e\n– Designed to withstand up to 75A current spikes and 25A continuous current. For heavy builds, we recommend the JeffTron \u003cstrong\u003eMosfet II\u003c\/strong\u003e circuit.\u003cbr\u003e\n– Compatible with all batteries up to 17 V (Ni-xx 8.4V – 14.4V, LiPo 7.4V – 14.8V, LiFe 9.9V – 13.2V)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCIRCUIT MANUAL: You can download the English manual \u003c\/strong\u003e\u003ca title=\"manual mosfet-v2\" href=\"https:\/\/www.jefftron.cz\/upload\/navod\/manual_mosfet-v3-above-gearbox.pdf\"\u003ehere\u003c\/a\u003e \u003cpdf kb\u003e\u003c\/pdf\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003eWARNING! Installation should be performed by a professional who can make \u003cem\u003ehigh-quality\u003c\/em\u003e solder joints and is experienced in repairing airsoft guns! Poor soldering and connections increase the load on the circuit and may cause damage.\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003cimg class=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0612\/6636\/2610\/files\/mosfet-v3_nad_mechabox.png\" width=\"676\" height=\"680\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg class=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0612\/6636\/2610\/files\/product_chart.png\" alt=\"tabulka_produktu\" width=\"811\" height=\"560\"\u003e\u003c\/p\u003e","brand":"Jefftron","offers":[{"title":"Default Title","offer_id":54236933816668,"sku":"0660902437566","price":29.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0612\/6636\/2610\/files\/mosfet-v3-nad-mech-1.jpg?v=1743370427"},{"product_id":"ics-cxp-muovinen-alarunko-musta-ma-350","title":"ICS CXP plastic lower frame - black (MA-350)","description":"\u003cp\u003ePolymer lower receiver for ICS CXP compatible rifles.\u003c\/p\u003e","brand":"ICS","offers":[{"title":"Default Title","offer_id":54237078782300,"sku":"MA-350","price":11.17,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0612\/6636\/2610\/files\/27b6edbd08d1fbad8c6f415a0f85bd65.png?v=1743372495"},{"product_id":"ics-hog-metallinen-ylarunko-hiekka-ma-315","title":"ICS HOG metal upper frame - sand (MA-315)","description":"\u003cp\u003eMetal upper receiver for ICS HOG compatible rifles.\u003c\/p\u003e","brand":"ICS","offers":[{"title":"Default Title","offer_id":54237080289628,"sku":"MA-315","price":36.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0612\/6636\/2610\/files\/89a9ba488949d31e90b6d94e176cdd1a.png?v=1743372526"},{"product_id":"ics-cxp-metallinen-alarunko-hiekka-ma-247","title":"ICS CXP metal lower frame - sand (MA-247)","description":"\u003cp\u003eICS CXP compatible metal lower receiver.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eICS as a manufacturer\u003cbr\u003e\n\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eICS is a long-established Taiwanese airsoft manufacturer with over 30 years in the industry. The company has been producing complete electric airsoft guns for more than 15 years. With extensive experience and a strong independent R\u0026amp;D department, ICS has secured its position in the premium category of airsoft products. The ICS development team has always aimed to design products that are in some way better than others, while remaining as compatible as possible with standard parts used by other manufacturers. This design philosophy has led to innovative solutions, such as the introduction of M4 series replicas equipped with a two-piece “split gearbox” and many other products.\u003c\/p\u003e","brand":"ICS","offers":[{"title":"Default Title","offer_id":54237080813916,"sku":"MA-247","price":22.42,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0612\/6636\/2610\/files\/03fd66d10b8ed59d29684082c96b8c80.png?v=1743372537"},{"product_id":"ics-sss-metallinen-vaihdilevy-ma-399","title":"ICS SSS metal shifter plate (MA-399)","description":"\u003cp\u003eMetal selector plate compatible with ICS SSS systems.\u003c\/p\u003e","brand":"ICS","offers":[{"title":"Default Title","offer_id":54237082255708,"sku":"MA-399","price":3.04,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0612\/6636\/2610\/files\/15430ccd4af5745819a4486f88066ab5.png?v=1743372568"},{"product_id":"ics-m4-ebb-metallinen-vaihdilevy-ma-338","title":"ICS M4 EBB metal shifter plate (MA-338)","description":"\u003cp\u003eMetal selector plate compatible with ICS M4 type rifles equipped with EBB.\u003c\/p\u003e","brand":"ICS","offers":[{"title":"Default Title","offer_id":54237083337052,"sku":"MA-338","price":3.04,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0612\/6636\/2610\/files\/72c01e89ee41fbe45693b7874b3db450.png?v=1743372587"},{"product_id":"ics-cs4-bolt-catch-johdotuksen-suojalla","title":"ICS CS4 bolt catch with wiring protection","description":"\u003cp\u003eCS4 Wire Guard Combination\u003c\/p\u003e","brand":"ICS","offers":[{"title":"Default Title","offer_id":54237084811612,"sku":"MA-23","price":3.04,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0612\/6636\/2610\/files\/fa75e6295fe499456f2a6174b465a662.png?v=1743372617"},{"product_id":"ics-cxp-mars-rataslaatikon-alaosa-fet-malliin-ma-446","title":"ICS CXP-MARS gearbox lower part for FET model (MA-446)","description":"\u003cp\u003eCXP-MARS Lower Gearbox Shell For FET\u003c\/p\u003e","brand":"ICS","offers":[{"title":"Default Title","offer_id":54237085466972,"sku":"MA-446","price":15.92,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0612\/6636\/2610\/files\/a29801bdb360c66af2333fa8f534b5ee.png?v=1743372628"},{"product_id":"ics-cs4-cxp-aeg-taydellinen-rataslaatikon-alaosa-sis-mosfet-piirin-ma-438","title":"ICS CS4\/CXP AEG complete lower gearbox, incl. MOSFET circuit (MA-438)","description":"\u003cp\u003eCS4\/CXP AEG Lower Gearbox Combination (Incl. MOSFET)\u003c\/p\u003e","brand":"ICS","offers":[{"title":"Default Title","offer_id":54237087334748,"sku":"MA-438","price":63.92,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0612\/6636\/2610\/files\/0274e790c99164f1eb46c2c4151facee.png?v=1743372660"},{"product_id":"siegetek-v6-7-cyclone-revolution-plus-13761-ratassarja-8-hampainen-dsg","title":"Siegetek V6\/7 Cyclone Revolution Plus 13.76:1 gear set (8-tooth DSG)","description":"\u003cp\u003eSiegetek gear sets are absolutely the best on the market in terms of mechanical properties and material selection. If you are looking for the highest performance from your airsoft gun, Siegetek gears are made for you.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMachined from chrome steel\u003c\/li\u003e\n\u003cli\u003eGears feature a manganese phosphate coating that binds lubricant to the gear surface\u003c\/li\u003e\n\u003cli\u003eThe shape of the notches that engage the cut-off lever is optimized to maximize the lever’s movement speed and minimize the risk of “semi-lock”\u003c\/li\u003e\n\u003cli\u003eGear teeth are slightly thicker than those of other manufacturers for maximum durability\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eCompatibility:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis gear set fits all electric guns equipped with a version 6 or 7 gearbox. Siegetek gears are designed to withstand any spring power available on the market. However, when selecting gears, it is important to consider the rest of the build and the battery in use. An underpowered motor or battery can become a bottleneck in setups requiring high torque.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote!\u003c\/strong\u003e See the manufacturer’s installation notes: http:\/\/www.siegetek.com\/instructions\/notes.pdf\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAbout Siegetek\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eSiegetek is a U.S.-based gear manufacturer with a mission to produce the highest quality and most durable gears in the world for airsoft use. Siegetek uses chrome steel for its gears, a material stronger than standard steel. Chrome steel is commonly used in applications requiring high strength, such as aircraft landing gear, firearm barrels, and the gears inside motorcycle transmissions.\u003c\/p\u003e\n\u003cp\u003eEnglish name: Cyclone Revolution Plus (10.44 ratio) gear set for V2\/3 mechbox (8-tooth dual-sector)\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003ehttps:\/\/www.itomairsoft.com\/airsoft-aseiden-rattaiden-ja-moottorien-valintaopas\/\u003c\/p\u003e","brand":"Siegetek","offers":[{"title":"Default Title","offer_id":54237122068828,"sku":"GS-R2-C","price":119.89,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0612\/6636\/2610\/files\/siegetek-v23-cyclone-revolution-plus-10441-ratassarja-8-hampainen-dsg-2.jpg?v=1743373322"},{"product_id":"siegetek-moottorin-ratas-motor-pinion-gear","title":"Siegetek Motor pinion, Motor Pinion Gear","description":"\u003cp\u003eSiegetek Motor Pinion Gear\u003cstrong\u003e\u003cbr\u003e\nManufactured by Siegetek\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eSiegetek is a U.S.-based gear manufacturer with a mission to produce the highest quality and most durable gears in the world for airsoft use. Siegetek uses chrome steel for its gears, a material stronger than standard steel. Chrome steel is commonly used in applications requiring high strength, such as aircraft landing gear, firearm barrels, and gears inside motorcycle transmissions.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Siegetek","offers":[{"title":"Default Title","offer_id":54237122822492,"sku":"G4","price":19.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0612\/6636\/2610\/files\/siegetek-v23-cyclone-revolution-plus-10441-ratassarja-8-hampainen-dsg.jpg?v=1743373342"},{"product_id":"gg-arp-9-low-cap-lipas-60-kuulaa-musta","title":"G\u0026G ARP 9 low-cap magazine, 60 rounds - black","description":"\u003cp\u003e G\u0026amp;G ARP 9 low-cap magazine, 60 rounds – black\u003c\/p\u003e","brand":"G\u0026G","offers":[{"title":"Default Title","offer_id":54237194584412,"sku":"4712972933946","price":19.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0612\/6636\/2610\/files\/24183.png?v=1743374434"},{"product_id":"valken-m92-ap92-co2-lipas","title":"Valken M92 (AP92) CO2 GBB gas magazine","description":"\u003cp\u003e CO2-powered spare magazine for Valken AP92 pistol.\u003c\/p\u003e","brand":"Valken","offers":[{"title":"Default Title","offer_id":54237204382044,"sku":"844959094211","price":17.94,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0612\/6636\/2610\/files\/Magazine-Valken-AP92-C02_media-1.jpg?v=1743374582"},{"product_id":"siegetek-moottorin-ratas-alimitoitettu-akselin-reika","title":"Siegetek Motor gear (undersized shaft hole)","description":"\u003cp\u003eEng: Siegetek Motor Pinion Gear (undersized bore)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSiegetek as Manufacturer\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eSiegetek is a U.S.-based gear manufacturer with a mission to produce the highest quality and most durable gears in the world for airsoft use. Siegetek uses chrome steel for its gears, a material stronger than standard steel. Chrome steel is commonly used in applications requiring high strength, such as aircraft landing gear, firearm barrels, and the gears inside motorcycle transmissions.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Siegetek","offers":[{"title":"Default Title","offer_id":54237291217244,"sku":"G4U","price":19.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0612\/6636\/2610\/files\/030320-9968-scaled.jpg?v=1743375706"},{"product_id":"ess-profile-turbofan-ballistiset-suojalasit-musta","title":"ESS Profile TurboFan Ballistic Goggles - Black","description":"\u003cp\u003eESS Profile TurboFan ballistic goggles are equipped with a fan for complete anti-fog protection. The fan has two settings: low and high. Compatible with night vision devices.\u003c\/p\u003e\n\u003cp\u003eThe ESS Striker Turbofan package includes:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eProfile TurboFan goggles with a clear lens and SpeedSleeve protective cover\u003c\/li\u003e\n\u003cli\u003eDark replacement lens\u003c\/li\u003e\n\u003cli\u003eProtective pouch for goggles with belt loops\u003c\/li\u003e\n\u003cli\u003eBattery pre-installed\u003c\/li\u003e\n\u003cli\u003eUser and maintenance manual\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHigh ballistic eye protection (U.S. MIL SPEC MIL-DTL-43511D, ANSI Z87.1+, U.S. Federal OSHA)\u003c\/li\u003e\n\u003cli\u003eWide field of view\u003c\/li\u003e\n\u003cli\u003eExcellent anti-fog performance\u003c\/li\u003e\n\u003cli\u003eDust filtration\u003c\/li\u003e\n\u003cli\u003e100% UVA\/UVB protection on all lenses\u003c\/li\u003e\n\u003cli\u003eLow-profile and compact frame\u003c\/li\u003e\n\u003cli\u003eOperates on one \u003ca href=\"https:\/\/www.itomairsoft.com\/tuote\/alkaliparisto-energizer-aa-e91-4-kpl\/\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eAA battery.\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0612\/6636\/2610\/files\/kuva55c4ac2132c71.jpg\" alt=\"\" data-pagespeed-url-hash=\"1301326257\"\u003e\u003c\/p\u003e","brand":"ESS","offers":[{"title":"Default Title","offer_id":54237333750108,"sku":"9010109066839","price":249.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0612\/6636\/2610\/files\/ess-profile-turbofan-ballistiset-suojalasit-musta.png?v=1743376120"},{"product_id":"springer-custom-works-vsr-10-jousenohjain","title":"Springer Custom Works VSR-10 spring guide","description":"\u003cp\u003eCNC-machined one-piece VSR-10 compatible spring guide. The SCW spring guide works best with the Springer Custom Works 90° VSR piston.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDiameter: 7.5 mm\u003c\/li\u003e\n\u003cli\u003eCan also be used with 13 mm springs.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Springer Custom Works","offers":[{"title":"Default Title","offer_id":54237363044700,"sku":"SCWSGVSR10","price":13.33,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0612\/6636\/2610\/files\/27e2ae_99c07b1aa5c24a5daa1d39a93be28baf_mv2_d_1600_1200_s_2.jpg?v=1743376353"},{"product_id":"tapp-airsoft-p226-hpa-sahkosyottoinen-rumpulipas-us-foster-liitin","title":"TAPP Airsoft P226 HPA Electric Drum Magazine - US Foster Connector","description":"\u003cp\u003eThe Tapp Airsoft electric-fed P226 HPA drum magazine is compatible with Marui \/ KJW \/ WE-compatible P226-style GBB pistols. The magazine converts your gas-powered blowback pistol into an HPA-powered setup. In addition to the magazine, you will need a low-pressure HPA regulator, hose, and air tank.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCompatibility:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMarui \/ WE \/ AW Custom \/ KJW-compatible P226-style GBB pistols\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFoster (US-fitting) compatible HPA connector\u003c\/li\u003e\n\u003cli\u003eElectric feeding system, with a loading button on the bottom of the magazine\u003c\/li\u003e\n\u003cli\u003eFeed channel pre-modified to single-stack for high feeding speed\u003c\/li\u003e\n\u003cli\u003eRequires a 9V battery\u003c\/li\u003e\n\u003cli\u003eRecommended operating pressure: 90–100 psi\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"TAPP Airsoft","offers":[{"title":"Default Title","offer_id":54237425860956,"sku":"7530-7533","price":134.19,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0612\/6636\/2610\/files\/p226d.jpg?v=1743377250"},{"product_id":"mil-tec-mikrokuitupyyhe-kantopussilla-od","title":"Mil-Tec Microfiber towel with carrying bag - OD","description":"\u003cp\u003eThe Mil-Tec microfiber towel with carry pouch is a high-quality towel with a practical size, supplied with a carry pouch. The microfiber towel absorbs moisture efficiently and also dries quickly.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMaterial: 80% polyester, 20% polyamide\u003c\/li\u003e\n\u003cli\u003eDimensions: 100 x 50 cm\u003c\/li\u003e\n\u003cli\u003eIncludes a mesh carry pouch made of 100% polyester\u003c\/li\u003e\n\u003cli\u003eTowel made from quick-drying and soft microfiber\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Mil-Tec","offers":[{"title":"Default Title","offer_id":54237533077852,"sku":"4046872258879","price":4.49,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0612\/6636\/2610\/files\/mil-tec-mikrokuitupyyhe.jpg?v=1743378828"},{"product_id":"jefftron-leviathan-ngrs-optinen-johdotus-taakse","title":"Jefftron Leviathan NGRS, optical (rear wiring)","description":"\u003cp\u003eThe optical Tokyo Marui NGRS-compatible Jefftron Leviathan is one of the most advanced microprocessor-controlled ETU (electronic trigger unit) boards on the airsoft market. The Jefftron Leviathan NGRS optical monitors the gear position in real time using \u003cstrong\u003etwo optical sensors\u003c\/strong\u003e. The Leviathan unit can be easily programmed via \u003cstrong\u003eBluetooth\u003c\/strong\u003e using a smartphone (iOS or Android).\u003c\/p\u003e\n\u003cp\u003eThanks to the Jefftron trigger sensor, the trigger pull can be as short as \u003cstrong\u003e0.13mm\u003c\/strong\u003e!\u003c\/p\u003e\n\u003cp\u003eThe Leviathan brings a wide range of new features to your AEG and improves existing functions. With this unit, you can control your gun’s fire modes, rate of fire (ROF), pre-cocking, active braking, protect LiPo\/LiFe batteries from over-discharge, and much more.\u003c\/p\u003e\n\u003cp\u003eThe Leviathan unit is fully installed inside a Version 2 gearbox, replacing the traditional trigger switch assembly. The unit comes pre-wired with complete wiring, including a 40A mini fuse and Deans\/T-connectors. No soldering is required during installation!\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003eWhat features does the Leviathan unit provide?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAdjust and add all fire modes to any selector position (SAFE - SEMI - AUTO).\u003c\/li\u003e\n\u003cli\u003eThree different burst fire modes. Each burst length can be set between 2 - 20 rounds.\u003c\/li\u003e\n\u003cli\u003eOption to stop firing when the magazine is empty. Magazine change can be signaled to the gun via an additional switch (sold separately).\u003c\/li\u003e\n\u003cli\u003eLimit the rate of fire by adding pauses between shots while maintaining an extremely fast trigger response, even when reducing full-auto speed via software.\u003c\/li\u003e\n\u003cli\u003eAdjustable active brake strength, which can also be disabled.\u003c\/li\u003e\n\u003cli\u003e\"Pre-cocking\" function for instant semi-auto response without delay.\u003c\/li\u003e\n\u003cli\u003eOption to add a delay between shots to simulate the effect of recoil on real firearms. Delay can be set between 0.1 - 4 seconds.\u003c\/li\u003e\n\u003cli\u003eLow voltage warning for LiPo or LiFe batteries. Works with 2S - 4S LiPo and 3S - 4S LiFe batteries.\u003c\/li\u003e\n\u003cli\u003eUser can save multiple configuration profiles.\u003c\/li\u003e\n\u003cli\u003eSoftware displays actual battery voltage with a color-coded indicator for charge level.\u003c\/li\u003e\n\u003cli\u003eThree separate shot counters: total lifetime shots, user-resettable counter, and one that resets when the battery is disconnected.\u003c\/li\u003e\n\u003cli\u003eError log records all errors during the unit’s lifetime.\u003c\/li\u003e\n\u003cli\u003eLeviathan NGRS monitors current, voltage, and temperature, protecting components from damage in case of failure.\u003c\/li\u003e\n\u003cli\u003eMotor vibrates and beeps to provide feedback to the user.\u003c\/li\u003e\n\u003cli\u003eProgramming settings are saved in real time to the Leviathan V2 memory unit, so you won’t lose settings if Bluetooth disconnects or the battery is removed during adjustment.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eProgrammable fire modes:\u003cbr\u003e\n\u003c\/strong\u003e\u003cem\u003eEach of the following fire modes can be assigned to any selector position (SAFE - SEMI - AUTO).\u003c\/em\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSAFE: Trigger pull does nothing, the gun is on safe.\u003c\/li\u003e\n\u003cli\u003eSEMI: Fires one shot per trigger pull.\u003c\/li\u003e\n\u003cli\u003eSEMI\/BurstX: Short pull fires one shot, long pull fires a preset burst.\u003c\/li\u003e\n\u003cli\u003e\"Double trigger\": Fires once on pull and once on release (two shots per full trigger cycle).\u003c\/li\u003e\n\u003cli\u003eBurstX: Fires a burst with one trigger pull.\u003c\/li\u003e\n\u003cli\u003eBurstX\/BurstY: Short pull fires burstX, long pull fires burstX followed by burstY.\u003c\/li\u003e\n\u003cli\u003eBurstX\/Full: Short pull fires burstX, long pull fires full-auto.\u003c\/li\u003e\n\u003cli\u003eFull: Fires full-auto as long as the trigger is held.\u003c\/li\u003e\n\u003cli\u003eVirtual reload: Pull the trigger to virtually reload the magazine.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSPECIFICATIONS:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe Leviathan electronic board is coated with lacquer for water protection.\u003c\/li\u003e\n\u003cli\u003ePre-cocking function requires an anti-reversal latch to prevent reverse gear rotation.\u003c\/li\u003e\n\u003cli\u003eDesigned to operate with batteries up to 17V. Compatible with 8.4 - 12V NiMH and 7.4 - 14.8V lithium-based batteries.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eLeviathan manual:\u003c\/strong\u003e Download the installation and user manual \u003ca title=\"manual_leviathan-v2\" href=\"https:\/\/www.jefftron.cz\/upload\/navod\/manual_leviathan-NGRS.pdf\"\u003eHERE\u003c\/a\u003e \u003cpdf mb english\u003e\u003c\/pdf\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDownload the Leviathan app:\u003c\/strong\u003e \u003ca href=\"https:\/\/www.jefftron.net\/application\"\u003ehttps:\/\/www.jefftron.net\/application\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePackage Includes:\u003c\/strong\u003e\u003cbr\u003e\n- Leviathan NGRS Optical rear-wired with Deans\/T-connector and 40A fuse slot. Motor wires with standard motor connectors.\u003cbr\u003e\n- Screw set for securing Leviathan inside the gearbox.\u003cbr\u003e\n- Foam pad for Leviathan installation.\u003cbr\u003e\n- English installation guide.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCompatibility:\u003cbr\u003e\n\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eTokyo Marui M4 Next Generation\u003c\/li\u003e\n\u003cli\u003eTokyo Marui HK416D Next Generation\u003c\/li\u003e\n\u003cli\u003eTokyo Marui HK416C Next Generation\u003c\/li\u003e\n\u003cli\u003eTokyo Marui SCAR-L Next Generation\u003c\/li\u003e\n\u003cli\u003eTokyo Marui SCAR-H Next Generation\u003c\/li\u003e\n\u003cli\u003eTokyo Marui HK417 Next Generation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSAFETY INSTRUCTIONS:\u003c\/strong\u003e\u003cbr\u003e\n- Installing the unit inside the gearbox requires knowledge and experience with airsoft gun mechanics.\u003cbr\u003e\n- Read the manual before installation to avoid damage!\u003cbr\u003e\n- A short circuit or incorrect battery connection will immediately damage the unit! Incorrect wiring voids the warranty and may cause the battery to explode!\u003cbr\u003e\n- Always disconnect the battery when the gun is not in use! Otherwise, the unit may slowly drain the battery, rendering it unusable. When connected, Leviathan draws a small standby current.\u003cbr\u003e\n- Always ensure the barrel is pointed in a safe direction before connecting the battery!\u003cbr\u003e\n- Do not modify, repair, or expose the Leviathan NGRS board to liquids or heat.\u003c\/p\u003e","brand":"Jefftron","offers":[{"title":"Default Title","offer_id":54237552935260,"sku":"0660902437900","price":109.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0612\/6636\/2610\/files\/leviathan-ngrs-gearbox-open.jpg?v=1743379132"},{"product_id":"retroarms-cnc-jatkettu-latauskahva-m4-ar15-b-keltainen","title":"Retro Arms CNC Extended Charging Handle M4\/AR15 - B (Yellow) (Discontinued Product)","description":"\u003cp\u003eRetroArms CNC Extended Charging Handle M4\/AR15 – B aluminum anodized extended charging handle part for M4-compatible airsoft guns.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eEng: CNC Extended Charging Handle AR15 - B (yellow)\u003c\/p\u003e\n\u003cdiv id=\"detailLeftCol\"\u003e\n\u003cdiv class=\"detailImage extraimg\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Retro Arms","offers":[{"title":"Default Title","offer_id":54237702455644,"sku":"8596308070064","price":7.62,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0612\/6636\/2610\/files\/RetroArms-CNC-jatkettu-latauskahva-M4AR15-n-B-keltainen.jpg?v=1743383159"},{"product_id":"retroarms-cnc-jatkettu-latauskahva-m4-ar15-b-vihrea","title":"Retro Arms CNC Extended Charging Handle M4\/AR15 - B (Green) (Discontinued Product)","description":"\u003cp\u003eRetroArms CNC Extended Charging Handle M4\/AR15 – B aluminum anodized extended charging handle grip for M4-compatible airsoft guns.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eEng: CNC Extended Charging Handle AR15 - B (greeb)\u003c\/p\u003e\n\u003cdiv id=\"detailLeftCol\"\u003e\n\u003cdiv class=\"detailImage extraimg\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Retro Arms","offers":[{"title":"Default Title","offer_id":54237702553948,"sku":"8596308070033","price":6.53,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0612\/6636\/2610\/files\/Nimeton-suunn.malli-4.jpg?v=1743383170"},{"product_id":"jefftron-mosfet-v2-johdotus-taakse","title":"Jefftron Mosfet - V2, rear wiring","description":"\u003cp\u003eJefftron Mosfet - V2, rear wiring connects an extremely small mosfet directly to the Version 2 mechanical switch contacts, allowing the mosfet to be installed entirely inside the gearbox with ease. The circuit prevents sparking that occurs in traditional mechanical trigger systems, which eventually leads to carbonized switch contacts. The circuit reduces the electrical resistance compared to a mechanical switch. This allows the motor to draw power from the battery more efficiently. Lower resistance makes the electrical system more effective, resulting in a higher rate of fire and reduced trigger delay.\u003c\/p\u003e\n\u003cp\u003eThe package includes suitable motor and fuse connectors as well as heat shrink tubing. In addition, the package contains a highly conductive T-connector (Deans) for battery connection. The connectors are separate and require soldering the wires to the connectors during installation. In the wired version, the wires connected to the circuit itself are pre-soldered to make assembly easier.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications:\u003cbr\u003e\n\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMosfet integrated with SHS-manufactured V2 switch contacts\u003c\/li\u003e\n\u003cli\u003eEasy to install in all V2 gearboxes\u003c\/li\u003e\n\u003cli\u003eUse a maximum of 1.5qmm (AWG16) power wires and 25qmm (AWG21) signal wire\u003c\/li\u003e\n\u003cli\u003eDesigned for continuous use with a maximum current of 25A. For heavy builds, we recommend the \u003ca href=\"https:\/\/www.itomairsoft.com\/tuote\/jefftron-mosfet-ii-johdotettuna\/\"\u003eMosfet II circuit\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003eDesigned to work with all batteries up to 17 V (Ni-xx 8.4V – 14.4V, Li-Po 7.4V – 14.8V, Li-Fe 9.9V – 13.2V)\u003cbr\u003e\n\u003cstrong\u003eD CIRCUIT INSTRUCTIONS: You can download the English manual \u003c\/strong\u003e\u003ca title=\"manual mosfet-v2\" href=\"https:\/\/www.jefftron.cz\/upload\/navod\/manual_mosfet-v2.pdf\"\u003ehere\u003c\/a\u003e \u003cpdf kb\u003e\u003c\/pdf\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWiring example:\u003c\/h3\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0612\/6636\/2610\/files\/mosfet-v2.png\" alt=\"\"\u003e\u003cimg class=\"center\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0612\/6636\/2610\/files\/product_chart.png\" alt=\"tabulka_produktu\"\u003e\u003c\/p\u003e","brand":"Jefftron","offers":[{"title":"Default Title","offer_id":54237776806236,"sku":"0660902437559","price":29.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0612\/6636\/2610\/files\/mosfet-v2-stock_1.jpg?v=1743384273"},{"product_id":"jj-airsoft-cnc-hop-up-yksikko-ak-masada","title":"JJ Airsoft CNC hop-up unit, A\u0026K Masada (discontinued product)","description":"\u003cp\u003eJJ Airsoft CNC hop-up unit, A\u0026amp;K Masada\u003c\/p\u003e\n\u003cp\u003eENG: JJ Airsoft CNC Hop-Up chamber for A\u0026amp;K Masada\u003c\/p\u003e\n\u003cdiv class=\"vm-product-rating-container\"\u003e\n\u003cdiv class=\"flexcol\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e","brand":"JJ Airsoft","offers":[{"title":"Default Title","offer_id":54237778837852,"sku":"10938","price":22.42,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0612\/6636\/2610\/files\/JA-3620c.jpg?v=1743384330"},{"product_id":"earmor-velcro-tarrapalat-msa-kuulosuojaimiin-musta","title":"EARMOR Velcro patches for MSA hearing protectors - black (discontinued product)","description":"\u003cp\u003eEarmor velcro patches are designed to be compatible with MSA-made earmuffs. The patches are applied to the outer surface of the earmuff cups, allowing various patches or accessories to be attached via hook-and-loop fastening.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eManufacturer product code: S14 (MSA)\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"EARMOR","offers":[{"title":"Default Title","offer_id":54237821436252,"sku":"600740368547","price":2.29,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0612\/6636\/2610\/files\/36937.png?v=1743385458"},{"product_id":"earmor-m31-m32-vaahtomuovipehmuste-varaosa","title":"EARMOR M31\/M32 foam cushion, spare part (discontinued product)","description":"\u003cp\u003eFoam-filled replacement ear pads compatible with Earmor M31\/M32 models.\u003c\/p\u003e\n\u003cp\u003eManufacturer product code: S02\u003c\/p\u003e","brand":"EARMOR","offers":[{"title":"Default Title","offer_id":54237824581980,"sku":"600740351914","price":4.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0612\/6636\/2610\/files\/36932.png?v=1743385557"},{"product_id":"earmor-m51-tactical-ptt-yeasu","title":"EARMOR M51 Tactical PTT - YEASU (discontinued product)","description":"\u003cp\u003eThe M51 Tactical PTT (Push To Talk) YAESU, designed and manufactured by Earmor, is intended for use with active hearing protection and communication headsets.\u003cbr\u003eThe M51 Tactical PTT enables simple and efficient communication without the need to pull your handheld radio out of your pocket. The PTT is installed between the microphone-equipped headset and the handheld radio, and the button on the PTT unit allows quick and easy activation of the radio transmission.\u003c\/p\u003e\n\u003cp\u003eCompatible with radios equipped with a YAESU connector.\u003c\/p\u003e\n\u003cp\u003eManufacturer product code: M15-YAESU\u003c\/p\u003e","brand":"EARMOR","offers":[{"title":"Default Title","offer_id":54237827170652,"sku":"600740352157","price":13.69,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0612\/6636\/2610\/files\/25274.png?v=1743385664"},{"product_id":"earmor-m51-tactical-ptt-topcom","title":"EARMOR M51 Tactical PTT - TOPCOM (discontinued product)","description":"\u003cp\u003eThe M51 Tactical PTT (Push To Talk) TOPCOM, designed and manufactured by Earmor, is intended for use with active hearing protection and communication headsets.\u003cbr\u003eThe M51 Tactical PTT enables simple and efficient communication without needing to take your handheld radio out of your pocket. The PTT is installed between the microphone-equipped headset and the handheld radio, and the button on the PTT unit allows quick and easy activation of the radio transmission.\u003c\/p\u003e\n\u003cp\u003eCompatible with radios equipped with a TOPCOM connector.\u003c\/p\u003e\n\u003cp\u003eManufacturer product code: M15-TC\u003c\/p\u003e","brand":"EARMOR","offers":[{"title":"Default Title","offer_id":54237829628252,"sku":"600740352478","price":13.69,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0612\/6636\/2610\/files\/25273_2_814f604a-94c5-43c6-b915-ad8d846c0fa2.png?v=1743385709"},{"product_id":"earmor-m50-etahallintakytkin-m51-pttlle","title":"EARMOR M50 remote control switch for M51 PTT (discontinued product)","description":"\u003cp\u003eEarmor’s M50 remote control switch is compatible with all M51 series PTT modules. The M50 remote switch allows the user to activate the M51 PTT button remotely. The M50 switch can be attached, for example, to a finger, making PTT operation even easier.\u003c\/p\u003e\n\u003cp\u003eCompatible with AM51 PTT modules.\u003c\/p\u003e\n\u003cp\u003eManufacturer product code: M50\u003c\/p\u003e","brand":"EARMOR","offers":[{"title":"Default Title","offer_id":54237831987548,"sku":"600740351907","price":8.38,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0612\/6636\/2610\/files\/25267.png?v=1743385739"},{"product_id":"nineball-tm-aep-tayssylinteri","title":"Nine Ball TM AEP full cylinder (discontinued product)","description":"\u003cp\u003e The Laylax Nineball TM AEP full cylinder is a Teflon coated cylinder for Tokyo Marui AEP compatible electric pistols.\u003c\/p\u003e","brand":"Nine Ball","offers":[{"title":"Default Title","offer_id":54237837197660,"sku":"4582109585955","price":13.96,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0612\/6636\/2610\/files\/26113.png?v=1743385860"},{"product_id":"nineball-tm-aep-manta-fixed-hard-piston-plus","title":"Nine Ball TM AEP piston, Fixed Hard Piston Plus (discontinued product)","description":"\u003cp\u003e Laylax Nineball TM AEP piston, Fixed Hard Piston Plus is made of durable POM material. Compatible with TM G18C\/M93R\/USP\/M9A1\/Hi-Capa E\/HK45 series\u003c\/p\u003e","brand":"Nine Ball","offers":[{"title":"Default Title","offer_id":54237837295964,"sku":"4582109589175","price":25.33,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0612\/6636\/2610\/files\/26118.png?v=1743385885"},{"product_id":"gate-eon-valmis-v2-rataslaatikko-titan-ii-bluetooth-12j-short-stroke","title":"GATE EON complete V2 gearbox + TITAN II Bluetooth (1.2J - Short Stroke)","description":"\u003cp\u003eThe Gate EON Complete V2 Gearbox + TITAN II Bluetooth® (1.2J - Short Stroke) is assembled from top-tier components. Gate analyzed and combined the best available AEG solutions into one ready-to-use package with no compromises on parts. In the 1.2J version, the piston stroke has been shortened (short stroke) to achieve lower power while maintaining the ability to deliver high rate of fire. Short stroke allows the use of a stiffer spring while keeping the energy low. A stiff spring enables a short cycle, improving durability at high rates of fire.\u003c\/p\u003e\n\u003cp\u003eInstead of worrying about tuning, you can now get a ready-to-use, complete gearbox with a warranty at a reasonable price.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHigh-performance build ensures incredible trigger response and reliability.\u003c\/li\u003e\n\u003cli\u003ePre-installed latest TITAN II Bluetooth® ETU gives you a highly innovative advantage.\u003c\/li\u003e\n\u003cli\u003eHigh-end upgrade parts such as GATE EON CNC gearbox and EON pneumatic set.\u003c\/li\u003e\n\u003cli\u003eThe first Bluetooth® connectivity on the market straight out of the box.\u003c\/li\u003e\n\u003cli\u003eGCS app allows you to customize your replica’s settings.\u003c\/li\u003e\n\u003cli\u003eFull support for brushless motors (Atom Airsoft recommends Warhead motors).\u003c\/li\u003e\n\u003cli\u003e2-year limited warranty (Gate has performed extreme tests with hundreds of thousands of shots fired).\u003c\/li\u003e\n\u003cli\u003ePlug \u0026amp; Play out of the box – easy installation.\u003c\/li\u003e\n\u003cli\u003eRear-wired.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eInternal Parts:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eGate EON V2 gearbox\u003c\/li\u003e\n\u003cli\u003eTITAN II Bluetooth® V2\u003c\/li\u003e\n\u003cli\u003eTITAN-optimized Nova trigger\u003c\/li\u003e\n\u003cli\u003eSSG 13:1 gears\u003c\/li\u003e\n\u003cli\u003eReinforced CNC-machined piston with full steel rack\u003c\/li\u003e\n\u003cli\u003eEON Protector cylinder head\u003c\/li\u003e\n\u003cli\u003eEON High Speed piston head\u003c\/li\u003e\n\u003cli\u003eCNC-machined POM nozzle – 21.25 mm\u003c\/li\u003e\n\u003cli\u003ePolished steel cylinder\u003c\/li\u003e\n\u003cli\u003eEON tappet plate\u003c\/li\u003e\n\u003cli\u003eReinforced anti-reversal latch\u003c\/li\u003e\n\u003cli\u003eReinforced low-friction 8mm ball bearings\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv style=\"width: 606px;\" class=\"wp-video\"\u003e\n\u003c!--\u003cif lt IE 9\u003e\u003e\u003cscript\u003edocument.createElement('video');\u003c\/script\u003e\u003c!\u003cendif\u003e--\u003e\u003cbr\u003e\n\u003cvideo class=\"wp-video-shortcode\" id=\"video-0-1\" width=\"606\" height=\"1080\" preload=\"metadata\" controls=\"controls\"\u003e\u003csource type=\"video\/mp4\" src=\"https:\/\/www.itomairsoft.com\/wp-content\/uploads\/2023\/02\/7d77267596df462c8f8410526f96636b.HD-1080p-7.2Mbps-9621306.mp4?_=1\"\u003e\u003ca href=\"https:\/\/www.itomairsoft.com\/wp-content\/uploads\/2023\/02\/7d77267596df462c8f8410526f96636b.HD-1080p-7.2Mbps-9621306.mp4\"\u003ehttps:\/\/www.itomairsoft.com\/wp-content\/uploads\/2023\/02\/7d77267596df462c8f8410526f96636b.HD-1080p-7.2Mbps-9621306.mp4\u003c\/a\u003e\u003c\/video\u003e\n\u003c\/div\u003e","brand":"GATE ENTERPRISE SP. Z O.O. SPK","offers":[{"title":"Default Title","offer_id":54237845717340,"sku":"GATE-EON-CGB2-SR12","price":449.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0612\/6636\/2610\/files\/gb-cs-ttn-II_220930-1753.webp?v=1743386178"},{"product_id":"gate-eon-valmis-v2-rataslaatikko-titan-ii-bluetooth-19j","title":"GATE EON complete V2 gearbox + TITAN II Bluetooth (1.9J)","description":"\u003cp\u003eThe Gate EON Complete V2 Gearbox + TITAN II Bluetooth® (1.9J) is assembled from top-tier components. Gate analyzed and combined the best available solutions for AEGs into one ready-to-use package with no compromises on parts. The 1.9J version features a full-stroke piston travel.\u003c\/p\u003e\n\u003cp\u003eInstead of worrying about tuning, you can now get a fully assembled, high-performance gearbox with warranty at a reasonable price.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBuilt for maximum performance, ensuring incredible trigger response and reliability.\u003c\/li\u003e\n\u003cli\u003ePre-installed latest TITAN II Bluetooth® ETU gives you a highly innovative advantage.\u003c\/li\u003e\n\u003cli\u003eHigh-end upgrade parts, such as the GATE EON CNC gearbox and EON pneumatic set.\u003c\/li\u003e\n\u003cli\u003eThe first on the market with Bluetooth® connectivity straight out of the box.\u003c\/li\u003e\n\u003cli\u003eGCS app allows you to customize your replica’s settings.\u003c\/li\u003e\n\u003cli\u003eFull support for brushless motors (Atom Airsoft recommends Warhead motors).\u003c\/li\u003e\n\u003cli\u003e2-year limited warranty (tested under extreme conditions with hundreds of thousands of shots).\u003c\/li\u003e\n\u003cli\u003ePlug \u0026amp; Play out of the box – easy installation.\u003c\/li\u003e\n\u003cli\u003eRear-wired.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eInternal Parts:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eGate EON V2 gearbox\u003c\/li\u003e\n\u003cli\u003eTITAN II Bluetooth® V2\u003c\/li\u003e\n\u003cli\u003eTITAN-optimized Nova trigger\u003c\/li\u003e\n\u003cli\u003eHigh Speed 13:1 gears\u003c\/li\u003e\n\u003cli\u003eReinforced CNC-machined piston with full steel rack\u003c\/li\u003e\n\u003cli\u003eEON Protector cylinder head\u003c\/li\u003e\n\u003cli\u003eEON High Speed piston head\u003c\/li\u003e\n\u003cli\u003eCNC-machined POM nozzle – 21.25 mm\u003c\/li\u003e\n\u003cli\u003ePolished steel cylinder\u003c\/li\u003e\n\u003cli\u003eEON tappet plate\u003c\/li\u003e\n\u003cli\u003eReinforced anti-reversal latch\u003c\/li\u003e\n\u003cli\u003eReinforced low-friction 8mm ball bearings\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv style=\"width: 606px;\" class=\"wp-video\"\u003e\u003cvideo class=\"wp-video-shortcode\" id=\"video-0-2\" width=\"606\" height=\"1080\" preload=\"metadata\" controls=\"controls\"\u003e\u003csource type=\"video\/mp4\" src=\"https:\/\/www.itomairsoft.com\/wp-content\/uploads\/2023\/02\/7d77267596df462c8f8410526f96636b.HD-1080p-7.2Mbps-9621306.mp4?_=2\"\u003e\u003ca href=\"https:\/\/www.itomairsoft.com\/wp-content\/uploads\/2023\/02\/7d77267596df462c8f8410526f96636b.HD-1080p-7.2Mbps-9621306.mp4\"\u003ehttps:\/\/www.itomairsoft.com\/wp-content\/uploads\/2023\/02\/7d77267596df462c8f8410526f96636b.HD-1080p-7.2Mbps-9621306.mp4\u003c\/a\u003e\u003c\/video\u003e\u003c\/div\u003e","brand":"GATE ENTERPRISE SP. Z O.O. SPK","offers":[{"title":"Default Title","offer_id":54237846307164,"sku":"GATE-EON-CGB2-FR18","price":449.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0612\/6636\/2610\/files\/gb-cs-ttn-II_220930-1753_1812bd21-c40a-4835-98e8-92ae0e0e28fe.webp?v=1743386203"},{"product_id":"novritsch-ssg10-a2-airsoft-tarkkuuskivaari","title":"Novritsch SSG10 A2 airsoft sniper rifle","description":"\u003cp\u003eThe Novritsch SSG10 A2 airsoft sniper rifle represents one of the most competitive precision rifles on the market. The SSG10’s internal system is made from incredibly durable components and can withstand up to an M220 spring (5 Joules).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eErgonomic SSG10 A2 stock\u003c\/li\u003e\n\u003cli\u003eExcellent air seal between the cylinder head and hop-up. The system maintains its seal even with the strongest springs on the market.\u003c\/li\u003e\n\u003cli\u003eVSR-10 compatible design\u003c\/li\u003e\n\u003cli\u003eQuiet shot thanks to the soft piston head\u003c\/li\u003e\n\u003cli\u003eMagazine ejection spring – makes magazine removal easier\u003c\/li\u003e\n\u003cli\u003eExtensive video library with courses and tutorials\u003c\/li\u003e\n\u003cli\u003eDesigned in Vienna, Austria by passionate airsoft players\u003c\/li\u003e\n\u003cli\u003eTechnical support team based in Vienna\u003c\/li\u003e\n\u003cli\u003eMuzzle energy: 2.8 J\u003c\/li\u003e\n\u003cli\u003eRecommended BB weight: 0.45 g\u003c\/li\u003e\n\u003cli\u003eWeight: 2930 g\u003c\/li\u003e\n\u003cli\u003eLength: 107 cm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe SSG10 A2 receiver and barrel assembly are delivered preassembled. The stock and receiver come separately. Attaching the stock to the receiver is simple and requires installing three screws. See the video for easy assembly \u003ca href=\"https:\/\/vimeo.com\/441278925\"\u003ehere\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWarranty\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cp\u003eAtom Airsoft provides a 12-month warranty for Novritsch products. The Atom Airsoft warranty includes both labor and spare parts for warranty repairs.\u003cbr\u003eNovritsch offers an extended 25-year parts warranty according to their terms (see terms and conditions).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote\u003c\/strong\u003e: The scope and bipod shown in the pictures are sold separately!\u003c\/p\u003e\n\u003cp\u003eSIMPLE TRIGGER MECHANISM\u003c\/p\u003e\n\u003cp\u003eThe SSG10 is designed from the ground up to be an efficient tool. The trigger mechanism is responsible for a consistent trigger pull and the extreme durability of the system. Its simple construction and robust materials ensure reliable performance.\u003c\/p\u003e\n\u003cp\u003eEXTREMELY DURABLE INTERNAL SYSTEM\u003c\/p\u003e\n\u003cp\u003eThe components and materials used in the system have been chosen to allow the use of even an M220 spring. The SSG10 operates with any spring. The internal system is designed to withstand both regular airsoft gameplay and stresses beyond what is normally allowed in games.\u003c\/p\u003e","brand":"Novritsch","offers":[{"title":"Default Title","offer_id":54237893001564,"sku":"689908302777","price":459.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0612\/6636\/2610\/files\/Nimeton-suunn.malli-6.png?v=1743387095"},{"product_id":"core-airsoft-dropstock-cnc-m4-m16-aeg-hpa-yhteensopiva","title":"CORE Airsoft Dropstock CNC, M4\/M16 AEG\/HPA compatible (discontinued product)","description":"\u003cp\u003eThe Core Airsoft CNC Dropstock for M4\/M16 AEG\/HPA allows you to lower the buffer tube of your airsoft gun by 2.2 cm. This makes aiming easier, especially when wearing a mask.\u003c\/p\u003e\n\u003cp\u003eThe part is CNC-machined from a single block of aluminum and is designed to fit all M4\/M16 AEG-compatible airsoft guns.\u003c\/p\u003e\n\u003cp\u003eCore Airsoft Italy is a company that manufactures high-quality external parts for both AEG and GBB replicas. A wide range of colors and the ability to customize almost every element satisfy both traditional airsoft and speedsoft players. All parts are designed and manufactured entirely in Italy.\u003c\/p\u003e","brand":"CORE Airsoft","offers":[{"title":"Default Title","offer_id":54237901685084,"sku":"5902543074850","price":51.53,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0612\/6636\/2610\/files\/1152234867_1.webp?v=1743387381"},{"product_id":"kwa-lm4d-m-lok-gbb-kaasukivaari","title":"KWA LM4D M-LOK GBB gas rifle","description":"\u003cp\u003eThe KWA Airsoft LM4D MLOK GBB gas rifle represents the newest version of KWA’s LM4 series. The receiver and handguard follow the design of modern sporting and military firearms. The fixed front and rear sights have been replaced with PTS folding flip-up iron sights, which can be conveniently folded down when using an optic.\u003c\/p\u003e\n\u003cp\u003eKWA’s new 9.5-inch tactical MLOK handguard provides ample space for accessories such as grips, weapon lights, and laser sights. The LM4D features ambidextrous fire selectors and a charging handle. The adjustable, minimalist stock includes QD sling mount sockets on both sides.\u003c\/p\u003e\n\u003cp\u003eThe LM4D MLOK trigger mechanism is designed to provide a realistic 8-pound trigger pull with a defined take-up and a clear break. The rifle’s strong Gas Blowback system delivers a sharp recoil on every shot. After the last BB, the bolt locks to the rear just like on a real firearm, enabling quick reloads.\u003c\/p\u003e\n\u003cp\u003eThe rifle features a tool-less adjustable hop-up.\u003c\/p\u003e\n\u003cp\u003eSupplier product code: 103-00219\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote\u003c\/strong\u003e: The barrel tip is black, contrary to the picture.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eExternal upgrades:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e10.5-inch outer barrel, 9.5-inch MLOK handguard\u003c\/li\u003e\n\u003cli\u003ePTS Syndicate polymer front and rear flip-up iron sights\u003c\/li\u003e\n\u003cli\u003ePTS EPG polymer pistol grip\u003c\/li\u003e\n\u003cli\u003eAmbidextrous charging handle\u003c\/li\u003e\n\u003cli\u003eAmbidextrous fire selector\u003c\/li\u003e\n\u003cli\u003eMinimalist stock\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eInternal upgrades:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRealistic trigger pull (8-lb break)\u003c\/li\u003e\n\u003cli\u003eUpdated tool-less adjustable hop-up\u003c\/li\u003e\n\u003cli\u003eRedesigned bolt interface\u003c\/li\u003e\n\u003cli\u003eTechnical specifications:\u003c\/li\u003e\n\u003cli\u003eFire modes: Full-auto and semi-auto\u003c\/li\u003e\n\u003cli\u003eRail system: M-LOK\u003c\/li\u003e\n\u003cli\u003eCompatible gas: Green Gas, Nimrod Green\u003c\/li\u003e\n\u003cli\u003eHop-up: Adjustable\u003c\/li\u003e\n\u003cli\u003eLength (collapsed): 74.3 cm\u003c\/li\u003e\n\u003cli\u003eLength (extended): 81.3 cm\u003c\/li\u003e\n\u003cli\u003eHeight: 20.3 cm\u003c\/li\u003e\n\u003cli\u003eOuter barrel length: 27.9 cm\u003c\/li\u003e\n\u003cli\u003eInner barrel length: 29.8 cm\u003c\/li\u003e\n\u003cli\u003eMagazine capacity: 40\u003c\/li\u003e\n\u003cli\u003eWeight: 2.95 kg\u003c\/li\u003e\n\u003cli\u003eRate of fire: 18+ RPS\u003c\/li\u003e\n\u003cli\u003eMuzzle velocity: 115–122 m\/s with 0.20 g BB\u003c\/li\u003e\n\u003cli\u003eMagazine \u0026amp; accessory compatibility: Compatible with MIL-SPEC stocks and pistol grips. Adjustable fixed sights.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/issuu.com\/kwausa\/docs\/manual_lm4d_lm4dmlok_3.3\"\u003eKWA LM4D user manual (English)\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"https:\/\/store.kwausa.com\/wp-content\/uploads\/2023\/05\/LM4D-mlok-Parts-diagram.pdf\"\u003eKWA LM4D exploded view\u003c\/a\u003e\u003c\/p\u003e","brand":"KWA","offers":[{"title":"Default Title","offer_id":54237921116508,"sku":"847724004552","price":419.89,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0612\/6636\/2610\/files\/Left-Profile.png?v=1743388935"},{"product_id":"we-ct25-gbb-kaasulipas-7-kuulaa-hopea","title":"WE CT25 GBB gas magazine, 7 bb's - silver","description":"\u003cp\u003eWE CT25 GBB Gas Magazine, 7 bb's\u003c\/p\u003e","brand":"WE","offers":[{"title":"Default Title","offer_id":54237943202140,"sku":"MG-CTG-SV","price":13.33,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0612\/6636\/2610\/files\/img_9618.jpg?v=1743390509"},{"product_id":"umarex-t4e-sport-ckb-kalkkikuula-50cal-500kpl","title":"UMAREX T4E Sport CKB calcium pellets .50cal, 500pcs","description":"\u003cp\u003eUmarex T4E Sport CKB chalk balls .50cal, 500 pcs are .50 caliber chalk balls that break on impact and leave a white chalk mark on the target.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eManufacturer product code:\u003c\/strong\u003e #2.4587\u003c\/p\u003e\n\u003ctable width=\"229\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd width=\"115\"\u003eCaliber:\u003c\/td\u003e\n\u003ctd width=\"114\"\u003e.50\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight (g):\u003c\/td\u003e\n\u003ctd\u003e0.95 g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePackage size:\u003c\/td\u003e\n\u003ctd\u003e500 pcs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"UMAREX","offers":[{"title":"Default Title","offer_id":54237966958940,"sku":"4000844643902","price":62.17,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0612\/6636\/2610\/files\/2.4587_10_16.jpg?v=1743391364"},{"product_id":"vfc-colt-urg-i-10-3-v3-gbbr-kaasukivaari","title":"VFC Colt URG-I 10.3\" V3 GBBR gas rifle","description":"\u003cp\u003eVFC Colt URG-I 10.3\" V3 GBBR gas rifle is a Colt-licensed airsoft gun designed to deliver exceptional realism and performance. This airsoft rifle is built according to the USASOC (United States Army Special Operations Command) \"upper receiver group-improved\" military standard.\u003c\/p\u003e\n\u003cp\u003eThe VFC Colt URG-I 10.3\" V3 gas rifle features a powerful blowback system and a patented \"GuidedHop-up\" that can be easily adjusted from the front of the M-LOK rail, making it an excellent choice for any dedicated enthusiast. This gas-powered rifle provides an experience that exceeds expectations both on the field and during dry-fire practice.\u003c\/p\u003e\n\u003ch4\u003eCybergun \u0026amp; Colt fully licensed airsoft gas rifle\u003c\/h4\u003e\n\u003cp\u003eThe VFC Colt URG-I V3 GBBR gas rifle is manufactured under authorization from Cybergun and features fully realistic Colt markings. The URG-I details have been reproduced in this replica exactly as on the real firearm. The design and dimensions of the parts are taken directly from an authentic Colt firearm.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eColt markings engraved on the receiver (licensed)\u003c\/li\u003e\n\u003cli\u003eV3 system version plus the latest valve strike system\u003c\/li\u003e\n\u003cli\u003eURG-I M-LOK compatible rail\u003c\/li\u003e\n\u003cli\u003eSteel bolt, trigger, and magazine release\u003c\/li\u003e\n\u003cli\u003eGuide Hop front-adjustable Hop-Up system\u003c\/li\u003e\n\u003cli\u003eRider-type folding front sight\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMaterial: Aluminum alloy \/ Steel \/ Fiber-reinforced polymer\u003c\/li\u003e\n\u003cli\u003eMagazine capacity: 30 rounds\u003c\/li\u003e\n\u003cli\u003eOverall length: 715 \/ 795 mm\u003c\/li\u003e\n\u003cli\u003eInner barrel length:\u003c\/li\u003e\n\u003cli\u003eWeight: 2810 g\u003c\/li\u003e\n\u003cli\u003eMuzzle energy: approx. 1.4 J\u003c\/li\u003e\n\u003cli\u003ePackage includes: Airsoft gun, magazine, user manual\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"VFC","offers":[{"title":"Default Title","offer_id":54238231429468,"sku":"VFC-VF2-LURGI-TB33","price":599.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0612\/6636\/2610\/files\/VFC-VF2-LURGI-TB33.png?v=1743394772"},{"product_id":"trinity-armament-ga-ta01p-hpa-training-replica-pulsar-d-hpa-yksikolla-titan-ii-bluetooth","title":"TRINITY ARMAMENT GA-TA01P HPA Training replica, PULSAR D - with HPA unit (TITAN II Bluetooth)","description":"\u003cp\u003eThe Trinity Armament GA-TA01P HPA is designed for demanding enthusiasts and professionals seeking cutting-edge technology combined with unmatched performance. This airsoft replica utilizes an HPA (High Pressure Air) system that delivers excellent accuracy, reliability, and customization. The replica is equipped with an advanced \u003cstrong\u003ePulsar D\u003c\/strong\u003e HPA unit and a \u003cstrong\u003eGATE Titan II Bluetooth®\u003c\/strong\u003e electronic control board, allowing full control and adjustment via a smartphone app.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePulsar D HPA Unit:\u003c\/strong\u003e Dual-solenoid HPA system providing consistent and smooth performance without mechanical wear.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGate Titan II Bluetooth® Control Board:\u003c\/strong\u003e Manage and adjust your replica’s functions through a mobile device. Titan II offers features such as:\n\u003cul\u003e\n\u003cli\u003eFunctional bolt-catch: The replica can be programmed to stop firing when the magazine is empty, requiring the bolt-catch button to be pressed after inserting a new magazine.\u003c\/li\u003e\n\u003cli\u003eMagazine detection: The replica will not fire unless a magazine is inserted into the magwell.\u003c\/li\u003e\n\u003cli\u003eAdjustable trigger sensitivity and programmable fire modes.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eAlpha Gearbox (internal housing)\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eM-LOK and RIS compatible free-float rail system:\u003c\/strong\u003e Allows versatile accessory mounting.\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eIncludes US connector \/ Foster fitting\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eBattery connector: JST and DEANS\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eNote! Air tank and regulator sold separately!\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMuzzle energy:\u003c\/strong\u003e adjustable\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMuzzle velocity:\u003c\/strong\u003e adjustable\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength with stock fully collapsed:\u003c\/strong\u003e 72 cm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength with stock fully extended:\u003c\/strong\u003e 80.5 cm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOuter barrel length:\u003c\/strong\u003e 10\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFront section length:\u003c\/strong\u003e 11.5\"\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eTrinity Armament – A Fusion of Innovation\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Trinity Armament brand is the result of a collaboration between GATE and ARCTURUS TACTICAL, combining the best technological solutions from both companies. Trinity Armament products merge GATE ENTERPRISE’s advanced technology with ARCTURUS’s proven quality and durability, delivering products that set a new standard for training-oriented airsoft equipment.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat sets the GA-TA01P HPA version apart from the competition?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eRealistic weapon handling for training:\u003c\/strong\u003e Electronic bolt-catch and magazine detection sensor simulate real magazine capacity and enable realistic handling drills.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting-edge technology and performance:\u003c\/strong\u003e CNC-machined components and the HPA system provide maximum accuracy and customization.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBluetooth connectivity and easy control:\u003c\/strong\u003e The TITAN II Bluetooth® board allows you to manage settings via your smartphone.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"TRINITY ARMAMENT","offers":[{"title":"Default Title","offer_id":54238257742172,"sku":"810127365377","price":799.92,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0612\/6636\/2610\/files\/trinity-GA-TA01-A-white-HPA-zlaczka_sklep.webp?v=1743395140"},{"product_id":"trinity-armament-ga-ta02p-hpa-training-replica-pulsar-d-hpa-yksikolla-titan-ii-bluetooth","title":"TRINITY ARMAMENT GA-TA02P HPA Training replica, PULSAR D - with HPA unit (TITAN II Bluetooth)","description":"\u003cp\u003eThe GA-TA02P HPA by Trinity Armament is designed specifically for demanding enthusiasts and professionals seeking cutting-edge technology combined with unmatched performance. This airsoft replica utilizes an HPA (High Pressure Air) system that delivers excellent accuracy, reliability, and customization. The replica is equipped with an advanced \u003cstrong\u003ePulsar D\u003c\/strong\u003e HPA unit and a \u003cstrong\u003eGATE Titan II Bluetooth®\u003c\/strong\u003e electronic control board, allowing complete control and adjustment via a smartphone application.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePulsar D HPA Unit:\u003c\/strong\u003e Dual-solenoid HPA system providing consistent and smooth performance without mechanical wear.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGate Titan II Bluetooth® Control Board:\u003c\/strong\u003e Manage and adjust your replica’s functions through a mobile device. Titan II offers features such as:\n\u003cul\u003e\n\u003cli\u003eFunctional bolt-catch: The replica can be programmed to stop firing when the magazine is empty, requiring the bolt-catch button to be pressed after inserting a new magazine.\u003c\/li\u003e\n\u003cli\u003eMagazine detection: The replica will not fire unless a magazine is inserted into the magwell.\u003c\/li\u003e\n\u003cli\u003eAdjustable trigger sensitivity and programmable fire modes.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eAlpha Gearbox (internal housing)\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eM-LOK and RIS compatible free-float rail system:\u003c\/strong\u003e Allows versatile accessory mounting.\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eIncludes US connector \/ Foster fitting\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eBattery connector: JST and DEANS\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eNote! Air tank and regulator sold separately!\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMuzzle energy:\u003c\/strong\u003e adjustable\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMuzzle velocity:\u003c\/strong\u003e adjustable\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength with stock fully collapsed:\u003c\/strong\u003e 82.5 cm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength with stock fully extended:\u003c\/strong\u003e 90.0 cm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOuter barrel length:\u003c\/strong\u003e 14\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFront section length:\u003c\/strong\u003e 15.3\"\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eTrinity Armament – A Fusion of Innovation\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Trinity Armament brand is the result of a collaboration between GATE and ARCTURUS TACTICAL, combining the best technological solutions from both companies. Trinity Armament products merge GATE ENTERPRISE’s advanced technology with ARCTURUS’s proven quality and durability, delivering products that set a new standard for training-oriented airsoft equipment.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat sets the GA-TA02P HPA version apart from the competition?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eRealistic weapon handling for training:\u003c\/strong\u003e Electronic bolt-catch and magazine detection sensor simulate real magazine capacity and enable realistic handling drills.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting-edge technology and performance:\u003c\/strong\u003e CNC-machined components and the HPA system provide maximum accuracy and customization.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBluetooth connectivity and easy control:\u003c\/strong\u003e The TITAN II Bluetooth® board allows you to manage settings via your smartphone.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"TRINITY ARMAMENT","offers":[{"title":"Default Title","offer_id":54238260232540,"sku":"810127365391","price":799.92,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0612\/6636\/2610\/files\/trinity-GA-TA02-A-white-HPA-zlaczka_sklep.webp?v=1743395178"},{"product_id":"specna-arms-daniel-defence-ris-iii-12-5-sa-p28-prime-aster-ii-etu-harjattomalla-moottorilla-musta","title":"Specna Arms Daniel Defence RIS III 12.5'' SA-P28 Prime Aster II ETU with brushless motor - black","description":"\u003cp\u003eThe Specna Arms Prime™ series combines Specna Arms’ years of experience and commitment to developing airsoft guns. The Prime series embodies this progress in one package, offering a high-quality airsoft gun at a cost-effective price. Specna Arms Prime replicas combine the quality of the EDGE™ series with the performance of new internal parts, ensuring an excellent out-of-the-box experience for the most demanding players. Traditionally, experienced players have taken new airsoft guns to a tuning shop immediately after purchase, but the Prime series changes that.\u003c\/p\u003e\n\u003cp\u003eThe Prime series is equipped with innovative solutions and the latest technologies, such as the brushless Dark Matter™ motor and Specna Arms Aether™ gearbox, making this series one of the most attractive options on the market. Specna Arms Prime changes the airsoft game and its minimum standards, as the Prime lineup is the first in the world to feature brushless motors as standard in electric airsoft guns!\u003c\/p\u003e\n\u003ch2\u003eSpecna Arms Daniel Defence RIS III 12.5'' SA-P28 Prime Aster II ETU\u003c\/h2\u003e\n\u003cp\u003eThe Specna Arms Daniel Defence RIS III 12.5'' SA-P28 Prime Aster II ETU airsoft gun replicates the AR-15 model with an updated RIS III rail from the real firearm manufacturer Daniel Defense®. The SA-P28 Prime is manufactured under an official \u003cstrong\u003eDaniel Defense®\u003c\/strong\u003e license, allowing the replica to accurately reproduce the original markings. The RIS III rail differs from the traditional Daniel Defense rail in that the RIS-compatible rails on the sides and bottom have been replaced with M-LOK-compatible slots. The M-LOK mounting points allow accessories to be attached directly to the M-LOK slots. The long top rail enables the installation of various optical sights, while the side and bottom rails are ideal for grips or weapon lights. The 12.5\" outer barrel features 14mm CCW threads under the flash hider for mounting a suppressor or tracer unit.\u003c\/p\u003e\n\u003ch2\u003eMain Features:\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e6.02 mm steel precision barrel\u003c\/strong\u003e: Improves accuracy and shot consistency.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTDC Magnus™ Hop-Up\u003c\/strong\u003e: Rotary-style TDC hop-up chamber ensures precise and stable hop-up adjustment (protected by European patent number 015052069-0001).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHelium™ Flat Hop rubber\u003c\/strong\u003e: Provides strong hop effect even for heavy BBs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eESA2™ quick spring change:\u003c\/strong\u003e Allows fast power adjustment by changing the spring without tools. Includes M90, M120, and M135 springs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGATE ASTER™ II Bluetooth®:\u003c\/strong\u003e Electronic unit easily programmable and adjustable via smartphone.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAether™ Gearbox\u003c\/strong\u003e: Heavily reinforced gearbox shell with multiple features, including spring release, pre-cocking, and AoE inspection windows.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrushless motor:\u003c\/strong\u003e Specna Arms Dark Matter 27k.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReinforced lower receiver:\u003c\/strong\u003e Increased material strength compared to previous models.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDeans\/T-plug battery connector:\u003c\/strong\u003e Includes adapter for mini-Tamiya connector.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNano Coating finish:\u003c\/strong\u003e Protects the receiver from scratches and maintains a sleek appearance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSerial number and hologram:\u003c\/strong\u003e Unique receiver serial number.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eAether™ Gearbox components:\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eReinforced polymer piston with steel teeth\u003c\/li\u003e\n\u003cli\u003e16:1 CNC steel gears\u003c\/li\u003e\n\u003cli\u003eAluminum pneumatic components\u003c\/li\u003e\n\u003cli\u003eBall-bearing spring guide\u003c\/li\u003e\n\u003cli\u003e8mm J-Cage ball bearings (motor and sector gear)\u003c\/li\u003e\n\u003cli\u003e8mm bushings (spur gear)\u003c\/li\u003e\n\u003cli\u003eQuantum Trigger 2, special trigger designed for ASTER board\u003c\/li\u003e\n\u003cli\u003eHigh-performance Specna Arms Dark Matter™ High Speed 27k brushless motor\u003c\/li\u003e\n\u003cli\u003eFactory-installed ASTER™ II Bluetooth® ETU module\u003c\/li\u003e\n\u003cli\u003eEnhanced ESA2™ quick spring change system\u003c\/li\u003e\n\u003cli\u003eProtected by European patent number: 015044865-0001\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eDark Matter™ brushless motor (27k)\u003c\/strong\u003e delivers efficiency and durability, while the ASTER™ II Bluetooth® ETU module provides top-tier electronics customizable via the app. This allows you to fine-tune the replica to your preferences using a smartphone application.\u003c\/p\u003e\n\u003ch2\u003eASTER™ II Bluetooth® features:\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eQuantum Trigger 2: Extremely sensitive trigger – 35 sensitivity adjustments within the first millimeter and 680 across the full pull\u003c\/li\u003e\n\u003cli\u003eBinary trigger option\u003c\/li\u003e\n\u003cli\u003eMotor and battery protection\u003c\/li\u003e\n\u003cli\u003eCompatible with brushless motors\u003c\/li\u003e\n\u003cli\u003ePre-cocking setting available\u003c\/li\u003e\n\u003cli\u003eAutomatic active brake\u003c\/li\u003e\n\u003cli\u003eLow battery warning\u003c\/li\u003e\n\u003cli\u003eSniper mode\u003c\/li\u003e\n\u003cli\u003eBluetooth connection to the app\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003ePackage Includes:\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSpecna Arms Daniel Defence SA-P28 Prime™ Aster II ETU with brushless motor\u003c\/li\u003e\n\u003cli\u003e2x S-Mag mid-cap magazines, 125 BBs each\u003c\/li\u003e\n\u003cli\u003eSpeedloader\u003c\/li\u003e\n\u003cli\u003eCleaning rod\u003c\/li\u003e\n\u003cli\u003eM85 spring\u003c\/li\u003e\n\u003cli\u003eM115 spring (pre-installed)\u003c\/li\u003e\n\u003cli\u003eM135 spring\u003c\/li\u003e\n\u003cli\u003eMini-Tamiya adapter (replica has Deans connector)\u003c\/li\u003e\n\u003cli\u003eAngled foregrip\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe SA-P28 from the Specna Arms Prime series is an excellent choice for those who want top-tier performance without additional tuning!\u003c\/p\u003e","brand":"Specna Arms","offers":[{"title":"Default Title","offer_id":54238283366748,"sku":"SPE1152239990","price":419.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0612\/6636\/2610\/files\/4f83899051c52d86bb18f335d409fd78a1ebe0ac_SPE_01_043657.webp?v=1743396115"},{"product_id":"gg-levar-7-kaasutoiminen-vipulukkoinen-airsoft-kivaari","title":"G\u0026G LevAR 7\" gas-operated lever-action airsoft rifle","description":"\u003cp\u003e The G\u0026amp;G LevAR gas-operated lever-action airsoft rifle combines a classic lever-action mechanism with modern design!\u003c\/p\u003e\n\n\u003cp\u003e Are you looking for an airsoft gun that offers a unique combination of classic lever action and modern modularity? The G\u0026amp;G LevAR Gas Powered Lever Action Airsoft Rifle is the perfect choice for you! This innovative airsoft rifle combines an AR-style upper frame with a lever action rifle, offering both a traditional and modern look and functionality.\u003c\/p\u003e\n\n\u003cp\u003e \u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003e Versatile M-LOK compatible foregrip and integrated Picatinny top rail allow for attachment of lights, lasers, grips, sights and other tactical accessories to the weapon\u003c\/li\u003e\n\n\u003cli\u003e Ambidextrous magazine release: Suitable for both right- and left-handed users.\u003c\/li\u003e\n\n\u003cli\u003e Compatible with AEG magazines: Comes with a 32-round low-cap magazine. The weapon is compatible with standard M4 \/ AR 15 series AEG magazines.\u003c\/li\u003e\n\n \u003cli\u003eCustomizable: You can use any G\u0026amp;G AR15\/M4 series electric airsoft rifle upper body on the gun.\u003c\/li\u003e\n\n\u003cli\u003e Gas-operated efficiency: Internal gas tank without blowback ensures excellent gas efficiency.\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\n\u003cp\u003e \u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003e Fuel: Gas, Green Gas\u003c\/li\u003e\n\n\u003cli\u003e Model: AR\/M4 SERIES\u003c\/li\u003e\n\n\u003cli\u003e Capacity (shots): 32\u003c\/li\u003e\n\n\u003cli\u003e Initial velocity (m\/s): approximately 110m\/s with a 0.20g bullet\u003c\/li\u003e\n\n\u003cli\u003e Blowback: No\u003c\/li\u003e\n\n\u003cli\u003e Hop-up: Adjustable\u003c\/li\u003e\n\n\u003cli\u003e Net weight (kg): 2.9\u003c\/li\u003e\n\n\u003cli\u003e Length (mm): 550\u003c\/li\u003e\n\n\u003cli\u003e Barrel thread type: CCW\u003c\/li\u003e\n\n\u003cli\u003e Frame material: Metal\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\n\u003cp\u003e \u003cstrong\u003eIn the package:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003e G\u0026amp;G LevAR 15-inch gas-operated lever-action rifle\u003c\/li\u003e\n\n\u003cli\u003e 32-round low-cap magazine\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\n\u003cp\u003e \u003cstrong\u003eMagazine compatibility:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003e M4 \/ AR-15 series AEG magazines fit the weapon\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\n\u003cp\u003e \u003cstrong\u003eParts compatibility:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003e G\u0026amp;G M4\/AR-15 series electric airsoft rifle uppers\u003c\/li\u003e\n\n\u003cli\u003e M-LOK compatible accessories\u003c\/li\u003e\n\n\u003cli\u003e Picatinny compatible accessories\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\n\u003cp\u003e https:\/\/www.youtube.com\/watch?v=0Wx84HkCchQ\u003c\/p\u003e","brand":"G\u0026G","offers":[{"title":"Default Title","offer_id":54238298243420,"sku":"GG-GAS-LVR-007-BNB-E","price":369.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0612\/6636\/2610\/files\/GAS-LVR-007-BNB-ECM-1L.jpg?v=1743396897"},{"product_id":"specna-arms-daniel-defense-mk18-sa-p26-prime-hal-etu-harjattomalla-moottorilla-chaos-bronze","title":"Specna Arms Daniel Defense MK18 SA-P26 Prime HAL ETU with Brushless Motor - Chaos Bronze","description":"\u003cp\u003eThe Specna Arms Prime™ model series combines Specna Arms' years of experience and commitment to airsoft gun development. The Prime model series embodies this development in one package, offering a top-quality airsoft gun at a cost-effective price. The Specna Arms Prime guns combine the quality of the EDGE™ series with the performance of new internal components, ensuring the most demanding enthusiasts an excellent gaming experience straight out of the box. Traditionally, long-time enthusiasts have taken new airsoft guns to the tuning shop immediately after purchase, but the Prime model series changes this.\u003c\/p\u003e\n\n \u003cp\u003eThe Prime series is equipped with innovative solutions and the latest technologies, such as the brushless Dark Matter™ motor and Specna Arms Aether™ gearboxes, making this series one of the most attractive options on the market. The Specna Arms Prime changes the airsoft competition landscape and minimum requirements, as the Prime series is the first in the world to introduce brushless motors as standard in airsoft electric guns!\u003c\/p\u003e\n\n\u003ch2\u003e Specna Arms Daniel Defense SA-P26 Prime™ HAL FRONT\u003c\/h2\u003e\n\n \u003cp\u003eThe Specna Arms Daniel Defence SA-P26 Prime™ HAL ETU airsoft gun is modeled after the firearm manufacturer Daniel Defense MK18. The SA-P26 Prime is manufactured under license \u003cstrong\u003efrom Daniel Defense\u003c\/strong\u003e , and therefore the gun has been able to trace the prototype of the gun down to the markings. The MK18's specialty is the RIS rail system located in the foregrip, which allows for the attachment of various accessories to the gun. The long rail on top of the gun allows for the attachment of various optical sights to the gun, and the side and bottom rails are perfect places for various grips or weapon lights. At the end of the 12.5\" outer barrel of the gun, there are 14mm CCW threads under the muzzle flash suppressor for the installation of a silencer or light strip device.\u003c\/p\u003e\n\n\u003ch2\u003e \u003cstrong\u003eMain features:\u003c\/strong\u003e\n\u003c\/h2\u003e\n\n\u003cul\u003e\n\n\u003cli\u003e\n\n \u003cstrong\u003e6.02 mm steel precision barrel\u003c\/strong\u003e : Improves accuracy and shot repeatability.\u003c\/li\u003e\n\n\u003cli\u003e \n\u003cstrong\u003eTDC Magnus™ Hop-Up\u003c\/strong\u003e : Rotary-style TDC hop-up chamber ensures precise and stable hop-up thread for the bullet (protected by European patent number 015052069-0001)\u003c\/li\u003e\n\n\u003cli\u003e\n\n \u003cstrong\u003eHelium™ Flat Hop rubber\u003c\/strong\u003e : Enables strong spin even for heavy balls.\u003c\/li\u003e\n\n\u003cli\u003e\n\n \u003cstrong\u003eESA2™ Quick Spring Change:\u003c\/strong\u003e Allows for quick adjustment of weapon power by changing the spring without tools. Includes M90, M120 and M135 standard springs\u003c\/li\u003e\n\n\u003cli\u003e\n\n \u003cstrong\u003eHAL ETU:\u003c\/strong\u003e Electronic unit that can be easily programmed and adjusted with a trigger\u003c\/li\u003e\n\n\u003cli\u003e\n\n \u003cstrong\u003eAether™ Gearbox\u003c\/strong\u003e : Heavily reinforced gearbox housings incorporating multiple features such as spring release, pre-alignment and AoE inspection windows\u003c\/li\u003e\n\n\u003cli\u003e\n\n \u003cstrong\u003eBrushless motor:\u003c\/strong\u003e Specna Arms Dark Matter 27k\u003c\/li\u003e\n\n\u003cli\u003e\n\n \u003cstrong\u003eReinforced lower frame:\u003c\/strong\u003e The material strength of the lower frame has been increased compared to previous models\u003c\/li\u003e\n\n\u003cli\u003e\n\n \u003cstrong\u003eNano Coating\u003c\/strong\u003e : The body does not scratch easily and maintains a stylish appearance.\u003c\/li\u003e\n\n\u003cli\u003e \n\u003cstrong\u003eSerial number and hologram\u003c\/strong\u003e : Unique chassis serial number\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\n\u003ch3\u003e \u003cstrong\u003eAether™ Gearbox parts:\u003c\/strong\u003e\n\u003c\/h3\u003e\n\n\u003cul\u003e\n\n\u003cli\u003e Reinforced polymer piston with steel teeth\u003c\/li\u003e\n\n\u003cli\u003e 16:1 CNC steel sprockets\u003c\/li\u003e\n\n\u003cli\u003e Aluminum pneumatic parts\u003c\/li\u003e\n\n\u003cli\u003e Ball bearing spring guide\u003c\/li\u003e\n\n\u003cli\u003e 8mm J-Cage ball bearings (motor and piston gear)\u003c\/li\u003e\n\n\u003cli\u003e 8mm plain bearings (middle gear)\u003c\/li\u003e\n\n\u003cli\u003e Quantum Trigger 2, a special trigger designed for the ASTER circuit\u003c\/li\u003e\n\n\u003cli\u003e Powerful Specna Arms Dark Matter™ High Speed ​​27k brushless motor\u003c\/li\u003e\n\n\u003cli\u003e Factory installed HAL ETU module\u003c\/li\u003e\n\n\u003cli\u003e Improved ESA2™ quick-adjust spring change\u003c\/li\u003e\n\n\u003cli\u003e Protected by European patent number: 015044865-0001\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\n\u003ch3\u003e HAL™ ETU module features:\u003c\/h3\u003e\n\n\u003cul\u003e\n\n\u003cli\u003e Trigger detection using magnetic sensors and the Hall effect\u003c\/li\u003e\n\n\u003cli\u003e Active brake\u003c\/li\u003e\n\n\u003cli\u003e Binary trigger function\u003c\/li\u003e\n\n\u003cli\u003e Adjustable trigger sensitivity (5 levels, 20-100%)\u003c\/li\u003e\n\n\u003cli\u003e Adjustable pre-cocking (6 levels)\u003c\/li\u003e\n\n\u003cli\u003e AUTO mode programming (full auto, semi, 3 shot burst, 5 shot burst)\u003c\/li\u003e\n\n\u003cli\u003e SEMI mode programming (semi, binary, AUG, sniper rifle)\u003c\/li\u003e\n\n\u003cli\u003e Easy programming with a trigger\u003c\/li\u003e\n\n \u003cli\u003eLow battery warning\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\n\u003ch3\u003e \u003cstrong\u003eIn the package:\u003c\/strong\u003e\n\u003c\/h3\u003e\n\n\u003cul\u003e\n\n\u003cli\u003e Specna Arms Daniel Defence SA-P26 Prime™ HAL ETU with brushless motor\u003c\/li\u003e\n\n\u003cli\u003e 2x S-Mag mid-cap magazine, 125 rounds\u003c\/li\u003e\n\n\u003cli\u003e Magazine loader\u003c\/li\u003e\n\n\u003cli\u003e Ramrod\u003c\/li\u003e\n\n\u003cli\u003e M85\u003c\/li\u003e\n\n\u003cli\u003e M115 spring (pre-installed)\u003c\/li\u003e\n\n\u003cli\u003e M135 spring\u003c\/li\u003e\n\n\u003cli\u003e Adapter for Mini-tamiya battery (gun has Deans connector)\u003c\/li\u003e\n\n\u003cli\u003e Front handle\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\n\u003cp\u003e The Specna Arms Prime Series SA-P26 is an excellent choice for those who want top-notch performance without any additional tweaks!\u003c\/p\u003e\n\n\u003ch2\u003e \u003cstrong\u003eNote: Calibrating the HAL™ trigger before use:\u003c\/strong\u003e\n\u003c\/h2\u003e\n\n\u003cp\u003e This airsoft gun is equipped with the HAL \u003cstrong\u003e™\u003c\/strong\u003e system and before using the gun, the trigger must be activated. Activation is done as follows: \u003c\/p\u003e\n\n\u003ctable style=\"height: 205px;\" border=\"0\" width=\"1118\" cellspacing=\"0\" cellpadding=\"0\"\u003e\n\n\u003ctbody\u003e\n\n\u003ctr\u003e\n\n\u003ctd width=\"64\" height=\"20\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0612\/6636\/2610\/files\/HAL-kayttoonotto.webp?v=1745966524\" alt=\"\"\u003e\u003c\/td\u003e\n\n\u003ctd width=\"64\"\u003e 1. Turn the gun's fire selector to the \"SAFE\" position\u003cbr\u003e 2. Connect the battery to the gun\u003cbr\u003e 3. Wait three (3) seconds until the gun emits a “beep” sound.\u003cbr\u003e 4. Press the trigger all the way down for five (5) seconds until the gun makes a “beep” sound. This indicates that the trigger has been successfully activated.\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\n\u003c\/tbody\u003e\n\n\n\u003c\/table\u003e\n\n\u003cp\u003e \u003cstrong\u003eRead more:\u003c\/strong\u003e \u003cbr\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0612\/6636\/2610\/files\/HAL1_manual_FI.pdf?v=1746630036\" rel=\"noopener\" target=\"_blank\"\u003eHAL manual EN\u003c\/a\u003e\u003c\/p\u003e\n\n\u003cp\u003e \u003ca href=\"https:\/\/specnaarms.com\/wp-content\/uploads\/2024\/04\/HAL1_manual_EN-PL.pdf\"\u003eHAL manual EN\u003c\/a\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003c\/p\u003e\n\n\u003ctable width=\"536\"\u003e\n\n\u003ctbody\u003e\n\n\u003ctr\u003e\n\n\u003ctd width=\"217\"\u003e Name:\u003c\/td\u003e\n\n\u003ctd width=\"319\"\u003e Specna Arms Daniel Defense 12.5'' SA-P26 Prime™ HAL ETU with brushless motor\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd width=\"217\"\u003e Manufacturer:\u003c\/td\u003e\n\n\u003ctd\u003e Specna Arms\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd width=\"217\"\u003e Output energy:\u003c\/td\u003e\n\n\u003ctd width=\"319\"\u003e approx. 0.90J \/1.6J \/ 1.8J\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd width=\"217\"\u003e Starting speed (0.20g):\u003c\/td\u003e\n\n\u003ctd width=\"319\"\u003e nn 95 \/ 125 \/ 140 m\/s\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd width=\"217\"\u003e Frame:\u003c\/td\u003e\n\n\u003ctd width=\"319\"\u003e Metal\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd width=\"217\"\u003e Magazine size and type:\u003c\/td\u003e\n\n\u003ctd width=\"319\"\u003e 125 bullets, mid-cap\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd width=\"217\"\u003e Gearbox:\u003c\/td\u003e\n\n\u003ctd width=\"319\"\u003e V2\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd width=\"217\"\u003e Hop up:\u003c\/td\u003e\n\n\u003ctd width=\"319\"\u003e Adjustable, Magnus TDC hop-up unit\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd width=\"217\"\u003e Blowback:\u003c\/td\u003e\n\n\u003ctd width=\"319\"\u003e No\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd width=\"217\"\u003e Weapon length:\u003c\/td\u003e\n\n\u003ctd\u003e 780 \/ 880mm\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd width=\"217\"\u003e Inner barrel length:\u003c\/td\u003e\n\n\u003ctd width=\"319\"\u003e 370mm\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd width=\"217\"\u003e Weight:\u003c\/td\u003e\n\n\u003ctd\u003e 2750g\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd width=\"217\"\u003e Power:\u003c\/td\u003e\n\n\u003ctd width=\"319\"\u003e Electric\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd width=\"217\"\u003e Compatible battery\/gas type:\u003c\/td\u003e\n\n\u003ctd width=\"319\"\u003e 7.4v or 11.1V Deans\/T-connector battery\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd width=\"217\"\u003e Engine:\u003c\/td\u003e\n\n\u003ctd width=\"319\"\u003e Long\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd width=\"217\"\u003e Fire forms:\u003c\/td\u003e\n\n\u003ctd width=\"319\"\u003e Programmable as desired\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd width=\"217\"\u003e Included in the package:\u003c\/td\u003e\n\n\u003ctd width=\"319\"\u003e Gun, 2x mid-cap magazines, magazine loader, cleaning rod, replacement springs, mini-jack adapter \u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\n\u003c\/tbody\u003e\n\n\n\u003c\/table\u003e\n\n\u003cp\u003e\u003c\/p\u003e","brand":"Specna Arms","offers":[{"title":"Default Title","offer_id":54238300176732,"sku":"SPE1152241247","price":379.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0612\/6636\/2610\/files\/Specna-Arms-Daniel-Defenser-MK18-SA-P26-Prime-HAL-ETU-harjattomalla-moottorilla-Chaos-Bronze.jpg?v=1743397040"},{"product_id":"m05-taisteluhousut-metsakuivio","title":"OrigoPro M05 Combat trousers","description":"\u003cp\u003eM05 combat trousers are designed to withstand demanding use in all conditions and provide the wearer with optimal comfort and the ability to function effectively. Combat trousers differ from ordinary field trousers in that they combine knee pads and a selection of pockets necessary on the battlefield in the same package. The M05 combat trousers have knee pad slots, into which a knee pad insert can be inserted. The knee pad is tightened in place using the knee pad tightening straps found on the punt. (Note: Knee pad inserts are sold separately!) The surface of the combat trousers at the knee is made of extremely durable Cordura fabric.\u003c\/p\u003e\n\n\u003cp\u003e The waist of the combat trousers is slightly higher at the back than the standard M05 field trousers. Under the belt loops there is a very low-profile Velcro fastening and a thin reinforcement, which makes the trousers more comfortable to wear with equipment belts.\u003c\/p\u003e\n\n \u003cp\u003eThe M05 combat trousers are equipped with standard, spacious front pockets with reinforced Cordura fabric at the openings. This increases durability and protects the fabric from wear if, for example, a clip-on flashlight or multi-tool is held at the pocket opening.\u003c\/p\u003e\n\n\u003cp\u003e The leg pockets of the trousers are designed to be practical: their openings turn around in the same way as in the British CS95 trousers, which prevents even the smallest objects from falling out of the pocket, even though the pocket is snap-fastened. In addition, there is a zipper on the front edge of the leg pocket, which makes it easy to use the pocket even when sitting. Next to the leg pockets, in the part that comes over the thigh, there are small accessory pockets for, for example, a phone or pens. A small pocket with snap-fastening on the right calf.\u003c\/p\u003e\n\n\u003cp\u003e The pants have a Velcro closure at the leg opening. The inner leg has Cordura reinforcement.\u003c\/p\u003e\n\n \u003cp\u003ePerfect for demanding terrain and active pursuits, the M05 combat pants combine performance and comfort. They are an excellent choice for anyone looking for durability, functionality and style in one package.\u003c\/p\u003e\n\n\u003cp\u003e \u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003e Knees have places for knee pad inserts\u003c\/li\u003e\n\n\u003cli\u003e A tightening strap at the top of the calf that locks the knee pad in place\u003c\/li\u003e\n\n\u003cli\u003e Waist tightening is done with thin laser-cut Velcro straps\u003c\/li\u003e\n\n\u003cli\u003e Raised back waist with thin reinforcement\u003c\/li\u003e\n\n\u003cli\u003e The edge of the front pockets is reinforced with laminated Cordura fabric\u003c\/li\u003e\n\n\u003cli\u003e Pivoting top edge on thigh pockets ensures items stay inside the pocket\u003c\/li\u003e\n\n\u003cli\u003e Thigh pocket flaps secured with soft-closing and silent snaps\u003c\/li\u003e\n\n\u003cli\u003e A hidden zipper on the front edge of the thigh pocket makes it easy to access even when sitting in the car.\u003c\/li\u003e\n\n\u003cli\u003e Next to the thigh pocket is a small pocket for a cell phone and other small items.\u003c\/li\u003e\n\n \u003cli\u003eThe fabric is breathable and stretchy: 38% Polyester, 20% Cotton 42% LYCRA T400 elastomultiester blend\u003c\/li\u003e\n\n\u003cli\u003e Reinforcements and laser-cut support pieces made of Cordura 100% Polyamide fabric\u003c\/li\u003e\n\n\u003cli\u003e Made in Estonia, designed in Finland\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\n\u003cp\u003e \u003cstrong\u003eSize:\u003cbr\u003e\n\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003e The M05 combat trousers are available in three different lengths: Short (6), Regular (7) and Long (8). Regular (7) corresponds to the normal leg length in C-size. The velcro waist adjustment allows for a slight adjustment of the waist circumference. Measure your waist circumference below the navel and compare it to the sizes of this product.\u003c\/p\u003e\n\n\u003cp\u003e \u003cstrong\u003e\u003cem\u003eNote! The waist circumference of the combat trousers is smaller than that of the M05 field trousers!\u003c\/em\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003e \u003cstrong\u003eLeg length\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003e Short (6) for people 160-170cm\u003c\/li\u003e\n\n\u003cli\u003e Regular (7) for people 170-180cm\u003c\/li\u003e\n\n\u003cli\u003e Long (8) for people 180-190cm\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\n\u003cp\u003e \u003cstrong\u003eWaist circumference:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003e Small (48) \/ 86 cm\u003c\/li\u003e\n\n\u003cli\u003e Medium (50) \/ 90 cm\u003c\/li\u003e\n\n\u003cli\u003e Large (52) \/ 96 cm\u003c\/li\u003e\n\n\u003cli\u003e X-Large (54) \/ 100 cm\u003c\/li\u003e\n\n\u003cli\u003e XX-Large (56) \/ 106 cm\u003c\/li\u003e\n\n\u003cli\u003e XXX-Large (58) \/ 112 cm\u003c\/li\u003e\n\n\n\u003c\/ul\u003e","brand":"Origopro Oy","offers":[{"title":"Medium Short (650)","offer_id":54476551323996,"sku":"ORIGO-CB-PANTS-M05_650","price":187.42,"currency_code":"EUR","in_stock":false},{"title":"Large Short (652)","offer_id":54476551356764,"sku":"ORIGO-CB-PANTS-M05_652","price":187.42,"currency_code":"EUR","in_stock":false},{"title":"Small Regular (748)","offer_id":54476551389532,"sku":"ORIGO-CB-PANTS-M05_748","price":187.42,"currency_code":"EUR","in_stock":false},{"title":"Medium Regular (750)","offer_id":54476551422300,"sku":"ORIGO-CB-PANTS-M05_750","price":249.9,"currency_code":"EUR","in_stock":true},{"title":"Large Regular (752)","offer_id":54476551455068,"sku":"ORIGO-CB-PANTS-M05_752","price":187.42,"currency_code":"EUR","in_stock":false},{"title":"XL Regular (754)","offer_id":54476551487836,"sku":"ORIGO-CB-PANTS-M05_754","price":187.42,"currency_code":"EUR","in_stock":false},{"title":"XXL Regular (756)","offer_id":54476551520604,"sku":"ORIGO-CB-PANTS-M05_756","price":187.42,"currency_code":"EUR","in_stock":false},{"title":"Medium Long (850)","offer_id":54476551553372,"sku":"ORIGO-CB-PANTS-M05_850","price":187.42,"currency_code":"EUR","in_stock":false},{"title":"Large Long (852)","offer_id":54476551586140,"sku":"ORIGO-CB-PANTS-M05_852","price":187.42,"currency_code":"EUR","in_stock":false},{"title":"XL Long (854)","offer_id":54476551618908,"sku":"ORIGO-CB-PANTS-M05_854","price":187.42,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0612\/6636\/2610\/files\/Taisteluhousut-M05-metsakuvio-13.jpg?v=1746619771"},{"product_id":"specna-arms-h-edge-2-0-alarunko_844542","title":"Specna Arms H EDGE 2.0 lower frame","description":"\u003cp\u003e The Specna Arms H EDGE 2.0 lower frame is a metal lower frame for the Specna Arms EDGE 2.0 H series such as the SA-H20 or SA-H21. The lower frame is compatible with the ESA2™ quick spring change.\u003c\/p\u003e","brand":"GF CORP SPÓŁKA Z OGRANICZONĄ ODPOWIEDZIALNOŚCIĄ SPÓŁKA KOMANDYTOWA","offers":[{"title":"Default Title","offer_id":54504033911132,"sku":"SPE1152234303","price":15.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0612\/6636\/2610\/files\/1152234303_1.webp?v=1747064449"}],"url":"https:\/\/itomairsoft.com\/en-lu\/collections\/sale-products.oembed","provider":"Atom Airsoft","version":"1.0","type":"link"}